About StockGauge
StockGauge is a free set of metal stock calculators and reference pages for fabricators, machinists, estimators, buyers and students. It covers sheet metal gauge and plate weight, bar stock weight and pipe schedule dimensions and weight, with the standard and the density stated next to every result.
StockGauge is an independent project operated by Hamza Bin Maqsood from Islamabad, Pakistan. It is not affiliated with any mill, distributor or standards body.
Why we built it
"16 gauge" is not one thickness: carbon steel, stainless steel, aluminum and galvanized sheet each use a different chart. A 2 inch pipe is not 2 inches across, and Schedule 40 is not always the same wall as STD. Calculators that hide these conventions give answers that look precise and disagree with each other. We wanted tools that name the chart, the standard and the density, so the number can be checked.
What you can do here
- Look up sheet thickness by gauge, or find the nearest gauge for a measured thickness, and get weight per ft² and m², and per 4×8 ft or 1250 × 2500 mm sheet.
- Weigh a cut plate from length, width, thickness and quantity.
- Weigh round, square, flat and hex bar in carbon steel, 304 and 316 stainless, 6061 aluminum, brass and copper.
- Look up pipe OD, wall, ID and weight for NPS 1/8 to 12 in Schedules 10, 40, 80 and 160, STD, XS and XXS.
- Read the reference guides on gauge charts, density, ordering thresholds, pipe sizing and weight tolerances.
How the calculators work
Every calculation runs in your browser. Weight is volume times density, computed in SI units and converted for display, using 7,850 kg/m³ for carbon and galvanized steel, 8,000 kg/m³ for stainless steel, 2,700 kg/m³ for aluminum, 8,500 kg/m³ for brass C360 and 8,940 kg/m³ for copper C110. Gauge thicknesses are the published chart values, and pipe dimensions follow ASME B36.10M. Nothing you enter is sent to a server. The site is a static website served from a global content delivery network.
Accuracy and limitations
We check the formulas against known values and the charts against their defining rules, but results are theoretical weights from nominal dimensions. Delivered material varies within mill tolerances, and published tables round differently. Confirm dimensions and weights with your supplier and the governing standard before ordering, and use a qualified engineer for structural, pressure or safety-critical work.
Advertising
StockGauge is free to use and may be supported by advertising, including Google AdSense. Advertising never changes calculation results. See our Privacy Policy for details on cookies.
Get in touch
Found an error or want a size added? Email contact@stockgauge.tech or use the contact page.