Skip to content
StockGauge Metal gauge · plate · bar · pipe

Metal Bar Stock Weight Calculator

Choose round, square, flat or hex bar, a material and the size to get weight per foot and per metre, the weight of one bar and the total for your order. The density of each metal is shown in the selector.

Metal bar stock weight calculator

Shape

Cross-section A = π/4 × d²

Per foot

2.673 lb

3.978 kg/m

One bar

32.07 lb

14.55 kg

Total × 1

32.07 lb

14.55 kg

Cross-section

0.7854 in²

506.7 mm²

Shape and size
Round bar, diameter 1 in
Material and density
Carbon Steel, 7,850 kg/m³ (0.2836 lb/in³)
Cross-section area
0.7854 in² · 506.7 mm²
Weight per foot
2.673 lb/ft
Weight per metre
3.978 kg/m
Length per bar
12 ft · 3.658 m
One bar
32.07 lb · 14.55 kg
Total for 1 bar
32.07 lb · 14.55 kg
  • Theoretical weight from nominal size and handbook density. Mill tolerances and cut length change delivered weight; see the tolerance guide.

Formulas by shape

Weight is cross-section area times length times density. For steel at 0.2836 lb/in³, a foot of bar weighs 12 times the area times 0.2836 lb.

Bar cross-section and carbon steel weight per foot by shape (dimensions in inches)
ShapeCross-section areaCarbon steel, lb/ft
Round bar π/4 × d²2.673 × d²
Square bar s²3.403 × s²
Flat bar / strip t × w3.403 × t × w
Hex bar (√3 / 2) × AF²2.947 × AF²

Multiply by 0.0975 ÷ 0.2836 for aluminum, 0.289 ÷ 0.2836 for stainless steel, 0.307 ÷ 0.2836 for brass.

Round bar weight chart

Round bar weight per foot (lb/ft) by diameter and material
Diameter (in)Carbon steelStainless steel6061 aluminumBrass C360Copper C110
1/4 0.1670.1700.0570.1810.190
3/8 0.3760.3830.1290.4070.428
1/2 0.6680.6810.2300.7240.761
5/8 1.0441.0640.3591.1311.189
3/4 1.5031.5320.5171.6281.712
1 2.6732.7240.9192.8943.044
1 1/4 4.1764.2561.4364.5224.756
1 1/2 6.0146.1292.0686.5126.849
2 10.69110.8963.67711.57712.176

Theoretical weight from nominal diameter and the densities listed on this page.

Bar weight pages

See also the plate, bar and pipe pages and the guide to calculating metal weight by hand.

Frequently asked questions

How do I calculate the weight of round bar?

Cross-section area is π/4 × d². Multiply by length and density. For 1 in carbon steel round bar: area = 0.7854 in², so one foot weighs 0.7854 × 12 × 0.2836 = 2.673 lb, or 3.978 kg per metre. Published tables often show 2.670 lb/ft because they round the density slightly.

What are the area formulas for square, flat and hex bar?

Square bar: s². Flat bar or strip: thickness × width. Hex bar: (√3/2) × AF², about 0.866 × AF², where AF is the distance across two parallel flats, which is how hex bar is sized. Weight per length is area × density.

Which density is used for stainless, aluminum, brass and copper?

304 and 316 stainless 8,000 kg/m³ (0.289 lb/in³), 6061 aluminum 2,700 kg/m³ (0.0975 lb/in³), brass C360 8,500 kg/m³ (0.307 lb/in³), copper C110 8,940 kg/m³ (0.323 lb/in³) and carbon steel 7,850 kg/m³ (0.2836 lb/in³). Real bar can differ by a fraction of a percent between alloys, heats and suppliers.

Why does the weight on the scale not match the calculated weight?

Calculated weight is theoretical: nominal size × handbook density. Bar is supplied within dimensional tolerances, so actual weight can be a little above or below theoretical. Ask your supplier whether they invoice on theoretical or actual weight.