1 Inch Round Steel Bar Weight per Foot and per Bar
1 inch round steel bar (diameter 1.0000 in) has a cross-section of 0.7854 in² and weighs 2.673 lb per foot (3.978 kg/m) at 7,850 kg/m³ (0.2836 lb/in³). A 12 ft bar weighs 32.1 lb and a 20 ft bar 53.5 lb.
- Size
- diameter 1.0000 in
- Cross-section
- 0.7854 in² · 506.7 mm²
- Weight per foot
- 2.673 lb
- Weight per metre
- 3.978 kg
- 12 ft / 20 ft bar
- 32.1 lb / 53.5 lb
- Density used
- 7,850 kg/m³ · 0.2836 lb/in³
Metal bar stock weight calculator
Per foot
2.673 lb
3.978 kg/m
One bar
32.07 lb
14.55 kg
Total × 1
32.07 lb
14.55 kg
Cross-section
0.7854 in²
506.7 mm²
- Shape and size
- Round bar, diameter 1 in
- Material and density
- Carbon Steel, 7,850 kg/m³ (0.2836 lb/in³)
- Cross-section area
- 0.7854 in² · 506.7 mm²
- Weight per foot
- 2.673 lb/ft
- Weight per metre
- 3.978 kg/m
- Length per bar
- 12 ft · 3.658 m
- One bar
- 32.07 lb · 14.55 kg
- Total for 1 bar
- 32.07 lb · 14.55 kg
- Theoretical weight from nominal size and handbook density. Mill tolerances and cut length change delivered weight; see the tolerance guide.
Worked calculation
- Cross-section area. Round bar, diameter 1.0000 in. A = π/4 × d² → π/4 × 1.0000² = 0.7854 in² (506.7 mm²).
- State the density. Carbon Steel: 7,850 kg/m³ = 0.2836 lb/in³.
- Weight per foot. 0.7854 in² × 12 in/ft × 0.2836 lb/in³ ≈ 2.673 lb/ft.
- Weight per metre. 506.7 mm² × 7,850 kg/m³ ÷ 1,000,000 ≈ 3.978 kg/m.
- Weight of a stock length. 12 ft: 2.673 × 12 ≈ 32.1 lb. 20 ft: 2.673 × 20 ≈ 53.5 lb.
Reference tables
| Metal | Density (kg/m³) | lb/ft | kg/m | 12 ft bar (lb) | 20 ft bar (lb) |
|---|---|---|---|---|---|
| Carbon Steel | 7,850 | 2.673 | 3.978 | 32.1 | 53.5 |
| 304 Stainless Steel | 8,000 | 2.724 | 4.054 | 32.7 | 54.5 |
| 316 Stainless Steel | 8,000 | 2.724 | 4.054 | 32.7 | 54.5 |
| 6061 Aluminum | 2,700 | 0.919 | 1.368 | 11.0 | 18.4 |
| Brass C360 (free-cutting) | 8,500 | 2.894 | 4.307 | 34.7 | 57.9 |
| Copper C110 | 8,940 | 3.044 | 4.530 | 36.5 | 60.9 |
304 and 316 use the same rounded 8,000 kg/m³ density. Real bar differs by a fraction of a percent between alloys and suppliers.
| Diameter | Area (in²) | lb/ft | kg/m | 20 ft bar (lb) |
|---|---|---|---|---|
| 3/4 in | 0.4418 | 1.503 | 2.237 | 30.1 |
| 7/8 in | 0.6013 | 2.046 | 3.045 | 40.9 |
| 1 in | 0.7854 | 2.673 | 3.978 | 53.5 |
| 1 1/4 in | 1.2272 | 4.176 | 6.215 | 83.5 |
| 1 1/2 in | 1.7671 | 6.014 | 8.950 | 120.3 |
| Shape | Area (in²) | lb/ft | kg/m |
|---|---|---|---|
| Round bar (diameter 1.0000 in) | 0.7854 | 2.673 | 3.978 |
| Square bar (side 1.0000 in) | 1.0000 | 3.403 | 5.065 |
| Hex bar (across flats 1.0000 in) | 0.8660 | 2.947 | 4.386 |
Engineering and fabrication notes
1 in round steel bar weighs 2.673 lb per foot (3.978 kg/m), so a standard 20 ft stick is about 53.5 lb. It is a typical size for shafts, pins, anchor rods and machined parts. Hot-rolled and cold-finished bars carry different diameter tolerances, and weight follows the square of the diameter: a bar that measures 1% under nominal weighs about 2% less, so a bundle of undersize bar can be noticeably lighter than the calculated figure. Published tables often show 2.670 lb/ft because they round density slightly; the difference is 0.11%.
Adjacent sizes and comparisons
- 2 inch round steel bar Same shape
- 1/2 inch round 6061 aluminum bar Same shape
- 1/4 × 2 inch flat steel bar Another bar shape or metal
- 1 inch square steel bar Another bar shape or metal
- Bar stock weight calculator Round, square, flat and hex
- Calculating metal weight by hand Reference guide
- All stock pages Plate, bar and pipe
Frequently asked questions
How much does 1 inch round steel bar weigh per foot?
2.673 lb per foot (3.978 kg per metre), from an area of 0.7854 in² and a density of 0.2836 lb/in³ (7,850 kg/m³).
How much does a 20 ft length of 1 inch round steel bar weigh?
About 53.5 lb (24.2 kg). A 12 ft length weighs 32.1 lb (14.5 kg). Actual bar varies with size tolerance.
What formula gives the weight of 1 inch round steel bar?
A = π/4 × d², which is 0.7854 in² for this size. Then weight per foot = area (in²) × 12 × density (lb/in³) = 0.7854 × 12 × 0.2836 ≈ 2.673 lb. In metric, weight per metre = area (mm²) × density (kg/m³) ÷ 1,000,000.
What would 1 inch round bar weigh in other metals?
Per foot: Carbon steel 2.673 lb, 304 stainless 2.724 lb, 316 stainless 2.724 lb, 6061 aluminum 0.919 lb, Brass C360 2.894 lb, Copper C110 3.044 lb.