Metal stock reference guides
Short, factual explanations of the conventions behind gauge charts, density, ordering thresholds, pipe sizing and delivered weight, each with the numbers worked out from the same data the calculators use.
-
Why 16 Gauge Is Not One Thickness
Four gauge charts, four thicknesses for the same number, with the exact 7–30 gauge tables and the formulas behind them.
Read the guide →
-
Calculating Metal Weight by Hand: Formulas and Density
The volume × density method for plate, bar and pipe, worked examples, and why tools differ between 7,850 and 7,870 kg/m³.
Read the guide →
-
Sheet vs Plate vs Gauge: What to Call and How to Order
The thickness and width thresholds that separate sheet, strip and plate in each metal, and how to write an unambiguous order.
Read the guide →
-
Pipe NPS vs OD vs Schedule
NPS is a label, OD is fixed, schedule sets the wall: with the exact STD/Sch 40 and XS/Sch 80 overlaps.
Read the guide →
-
Theoretical vs Delivered Weight: Mill Tolerances
How rolling and pipe tolerances (ASTM A6, A480, A53) and coatings make real weight differ from the calculated figure.
Read the guide →