Skip to content
StockGauge Metal gauge · plate · bar · pipe

18 Gauge Galvanized Steel Thickness and Weight

A 18 gauge galvanized steel sheet is 0.0516 in (1.311 mm) thick. At 7,850 kg/m³ (0.2836 lb/in³) it weighs 2.107 lb/ft² (10.29 kg/m²), so a 4×8 ft sheet weighs 67.4 lb (30.6 kg) and a 1250×2500 mm sheet weighs 32.2 kg (70.9 lb).

Thickness
0.0516 in · 1.311 mm
Weight per ft²
2.107 lb
Weight per m²
10.29 kg
4×8 ft sheet
67.4 lb · 30.6 kg
1250×2500 mm sheet
32.2 kg · 70.9 lb
Density used
7,850 kg/m³ · 0.2836 lb/in³

Sheet metal gauge & plate weight calculator

Mode

Galvanized Sheet Gauge. MSG steel thickness plus about 0.0037–0.0038 in of zinc coating. Density 7,850 kg/m³ = 0.2836 lb/in³. Steel base density. The zinc coating is included in the published galvanized gauge thickness, not in the density.

Thickness

0.0516 in

1.31 mm

Per ft²

2.107 lb

10.29 kg/m²

4 × 8 ft sheet

67.43 lb

30.59 kg

1250 × 2500 mm

32.15 kg

70.88 lb

Gauge standard
Galvanized Sheet Gauge
Thickness
0.0516 in · 1.311 mm
Nearest gauge
18 ga on the Galvanized chart
Density
7,850 kg/m³ (0.2836 lb/in³)
Weight per ft²
2.107 lb
Weight per m²
10.29 kg
4 × 8 ft (48 × 96 in) sheet (32 ft²)
67.43 lb · 30.59 kg
1250 × 2500 mm sheet (3.125 m²)
70.88 lb · 32.15 kg
  • Galvanized gauge thickness includes the zinc coating. Published galvanized charts start at 8 gauge.

Worked calculation

  1. Look up the thickness. Galvanized Sheet Gauge, 18 ga = 0.0516 in. In millimetres: 0.0516 × 25.4 = 1.311 mm.
  2. State the density. Galvanized Steel: 7,850 kg/m³ = 0.2836 lb/in³ (1 lb/in³ = 27,679.9 kg/m³).
  3. Weight per square foot. 0.0516 in × 144 in²/ft² × 0.2836 lb/in³ ≈ 2.107 lb/ft².
  4. Weight per square metre. 1.311 mm × 7.85 kg/m²/mm (density ÷ 1,000) ≈ 10.29 kg/m².
  5. Weight of a 4×8 ft sheet. 2.107 lb/ft² × 32 ft² ≈ 67.4 lb (30.6 kg). For a 1250×2500 mm sheet: 10.29 kg/m² × 3.125 m² ≈ 32.2 kg.
  6. Compare with the published chart weight. MSG defines 18 ga as 2.000 lb/ft² nominal (0.0516 in × 41.82 lb/ft² per inch). The density-based 2.107 lb/ft² is -5.1% lower because 7,850 kg/m³ equals 40.84 lb/ft² per inch, not 41.82.

Reference tables

18 gauge in each chart (density-based weights)
ChartThickness (in)Thickness (mm)lb/ft²kg/m²4×8 ft sheet (lb)
Manufacturers' Standard Gauge (MSG) 0.04781.211.9529.5362.5
Stainless Steel Gauge (U.S. Standard progression) 0.05001.272.08110.1666.6
Brown & Sharpe / American Wire Gauge (AWG) 0.04031.020.5662.7618.1
Galvanized Sheet Gauge 0.05161.312.10710.2967.4

The same gauge number gives a different thickness in every chart.

Galvanized gauges around 18 ga
GaugeThickness (in)Thickness (mm)lb/ft²kg/m²4×8 ft sheet (lb)
16 ga 0.06351.612.59312.6683.0
17 ga 0.05751.462.34811.4675.1
18 ga 0.05161.312.10710.2967.4
19 ga 0.04561.161.8629.0959.6
20 ga 0.03961.011.6177.9051.8

Engineering and fabrication notes

18 gauge galvanized steel is 0.0516 in (1.31 mm): the 0.0478 in carbon steel base plus about 0.0038 in of coating allowance. It is common in HVAC ductwork, light enclosures and general sheet metal work. Coating class matters as much as thickness for outdoor life: designations such as G60 and G90 state the coating mass, so check the class on the order. A 4×8 sheet weighs about 67.4 lb (2.107 lb/ft²), a little over the 64.0 lb of uncoated 18 gauge steel by the chart.

Frequently asked questions

What is the thickness of 18 gauge galvanized steel?

18 Gauge Galvanized Steel is 0.0516 in or 1.31 mm on the Galvanized Sheet Gauge chart. MSG steel thickness plus about 0.0037–0.0038 in of zinc coating.

How much does a 4×8 sheet of 18 gauge galvanized steel weigh?

A 4×8 ft (48 × 96 in) sheet of 18 gauge galvanized steel weighs about 67.4 lb (30.6 kg) using 7,850 kg/m³. That is 2.107 lb/ft² × 32 ft². Actual mill weight varies with thickness tolerance.

Is 18 gauge galvanized steel the same thickness as 18 gauge in other metals?

No. At 18 gauge the charts give 0.0478 in for carbon steel, 0.0500 in for stainless steel, 0.0403 in for aluminum and 0.0516 in for galvanized steel.

Does 18 gauge galvanized steel include the zinc coating?

Yes. The galvanized gauge chart adds about 0.0037–0.0038 in to the carbon steel thickness for the coating, so 18 ga galvanized is 0.0516 in against 0.0478 in for uncoated steel. Coating class (for example G60 or G90) is specified separately.