Skip to content
StockGauge Metal gauge · plate · bar · pipe

20 Gauge Steel Thickness and Weight

A 20 gauge carbon steel (MSG) sheet is 0.0359 in (0.912 mm) thick. At 7,850 kg/m³ (0.2836 lb/in³) it weighs 1.466 lb/ft² (7.16 kg/m²), so a 4×8 ft sheet weighs 46.9 lb (21.3 kg) and a 1250×2500 mm sheet weighs 22.4 kg (49.3 lb).

Thickness
0.0359 in · 0.912 mm
Weight per ft²
1.466 lb
Weight per m²
7.16 kg
4×8 ft sheet
46.9 lb · 21.3 kg
1250×2500 mm sheet
22.4 kg · 49.3 lb
Density used
7,850 kg/m³ · 0.2836 lb/in³

Sheet metal gauge & plate weight calculator

Mode

Manufacturers' Standard Gauge (MSG). Weight-defined: nominal lb/ft² ÷ 41.82 lb/ft² per inch. Density 7,850 kg/m³ = 0.2836 lb/in³. Common handbook value for carbon and low-alloy steel (ASTM A36 design density).

Thickness

0.0359 in

0.91 mm

Per ft²

1.466 lb

7.16 kg/m²

4 × 8 ft sheet

46.92 lb

21.28 kg

1250 × 2500 mm

22.37 kg

49.32 lb

Gauge standard
Manufacturers' Standard Gauge (MSG)
Thickness
0.0359 in · 0.912 mm
Nearest gauge
20 ga on the MSG chart
Density
7,850 kg/m³ (0.2836 lb/in³)
Weight per ft²
1.466 lb
Weight per m²
7.16 kg
4 × 8 ft (48 × 96 in) sheet (32 ft²)
46.92 lb · 21.28 kg
1250 × 2500 mm sheet (3.125 m²)
49.32 lb · 22.37 kg
  • Published MSG charts list 1.500 lb/ft² for 20 ga because they use 41.82 lb/ft² per inch. Density-based weight is 1.466 lb/ft² (40.84 lb/ft² per inch).

Worked calculation

  1. Look up the thickness. Manufacturers' Standard Gauge (MSG), 20 ga = 0.0359 in. In millimetres: 0.0359 × 25.4 = 0.912 mm.
  2. State the density. Carbon Steel: 7,850 kg/m³ = 0.2836 lb/in³ (1 lb/in³ = 27,679.9 kg/m³).
  3. Weight per square foot. 0.0359 in × 144 in²/ft² × 0.2836 lb/in³ ≈ 1.466 lb/ft².
  4. Weight per square metre. 0.912 mm × 7.85 kg/m²/mm (density ÷ 1,000) ≈ 7.16 kg/m².
  5. Weight of a 4×8 ft sheet. 1.466 lb/ft² × 32 ft² ≈ 46.9 lb (21.3 kg). For a 1250×2500 mm sheet: 7.16 kg/m² × 3.125 m² ≈ 22.4 kg.
  6. Compare with the published chart weight. MSG defines 20 ga as 1.500 lb/ft² nominal (0.0359 in × 41.82 lb/ft² per inch). The density-based 1.466 lb/ft² is 2.3% lower because 7,850 kg/m³ equals 40.84 lb/ft² per inch, not 41.82.

Reference tables

20 gauge in each chart (density-based weights)
ChartThickness (in)Thickness (mm)lb/ft²kg/m²4×8 ft sheet (lb)
Manufacturers' Standard Gauge (MSG) 0.03590.911.4667.1646.9
Stainless Steel Gauge (U.S. Standard progression) 0.03750.951.5617.6249.9
Brown & Sharpe / American Wire Gauge (AWG) 0.03200.810.4492.1914.4
Galvanized Sheet Gauge 0.03961.011.6177.9051.8

The same gauge number gives a different thickness in every chart.

MSG gauges around 20 ga
GaugeThickness (in)Thickness (mm)lb/ft²kg/m²4×8 ft sheet (lb)
18 ga 0.04781.211.9529.5362.5
19 ga 0.04181.061.7078.3354.6
20 ga 0.03590.911.4667.1646.9
21 ga 0.03290.841.3446.5643.0
22 ga 0.02990.761.2215.9639.1

Engineering and fabrication notes

20 gauge (0.0359 in, 0.91 mm) is a light-duty sheet used for covers, access panels, light ductwork, trim and parts that are cut and formed by hand or on small brakes. It weighs 1.466 lb/ft² by density (1.500 lb/ft² by the chart), so a 4×8 sheet is about 46.9 lb and one person can move it with care. Thin sheet distorts under welding heat, so tack weld sparingly or use fasteners, seams or spot welds, and expect sharp edges on cut blanks.

Frequently asked questions

What is the thickness of 20 gauge carbon steel (MSG)?

20 Gauge Steel is 0.0359 in or 0.91 mm on the Manufacturers' Standard Gauge (MSG) chart. Weight-defined: nominal lb/ft² ÷ 41.82 lb/ft² per inch.

How much does a 4×8 sheet of 20 gauge carbon steel (MSG) weigh?

A 4×8 ft (48 × 96 in) sheet of 20 gauge carbon steel (MSG) weighs about 46.9 lb (21.3 kg) using 7,850 kg/m³. That is 1.466 lb/ft² × 32 ft². Actual mill weight varies with thickness tolerance.

Is 20 gauge steel the same thickness as 20 gauge in other metals?

No. At 20 gauge the charts give 0.0359 in for carbon steel, 0.0375 in for stainless steel, 0.0320 in for aluminum and 0.0396 in for galvanized steel.

Why does a chart list 20 gauge steel as 1.500 lb/ft²?

Manufacturers' Standard Gauge was defined by weight: 20 ga is a nominal 1.500 lb/ft², and the thickness 0.0359 in is that weight divided by 41.82 lb/ft² per inch. True steel density gives 1.466 lb/ft², about 2.3% less.