22 Gauge Steel Thickness and Weight
A 22 gauge carbon steel (MSG) sheet is 0.0299 in (0.759 mm) thick. At 7,850 kg/m³ (0.2836 lb/in³) it weighs 1.221 lb/ft² (5.96 kg/m²), so a 4×8 ft sheet weighs 39.1 lb (17.7 kg) and a 1250×2500 mm sheet weighs 18.6 kg (41.1 lb).
- Thickness
- 0.0299 in · 0.759 mm
- Weight per ft²
- 1.221 lb
- Weight per m²
- 5.96 kg
- 4×8 ft sheet
- 39.1 lb · 17.7 kg
- 1250×2500 mm sheet
- 18.6 kg · 41.1 lb
- Density used
- 7,850 kg/m³ · 0.2836 lb/in³
Sheet metal gauge & plate weight calculator
Thickness
0.0299 in
0.76 mm
Per ft²
1.221 lb
5.96 kg/m²
4 × 8 ft sheet
39.07 lb
17.72 kg
1250 × 2500 mm
18.63 kg
41.07 lb
- Gauge standard
- Manufacturers' Standard Gauge (MSG)
- Thickness
- 0.0299 in · 0.759 mm
- Nearest gauge
- 22 ga on the MSG chart
- Density
- 7,850 kg/m³ (0.2836 lb/in³)
- Weight per ft²
- 1.221 lb
- Weight per m²
- 5.96 kg
- 4 × 8 ft (48 × 96 in) sheet (32 ft²)
- 39.07 lb · 17.72 kg
- 1250 × 2500 mm sheet (3.125 m²)
- 41.07 lb · 18.63 kg
- Published MSG charts list 1.250 lb/ft² for 22 ga because they use 41.82 lb/ft² per inch. Density-based weight is 1.221 lb/ft² (40.84 lb/ft² per inch).
Worked calculation
- Look up the thickness. Manufacturers' Standard Gauge (MSG), 22 ga = 0.0299 in. In millimetres: 0.0299 × 25.4 = 0.759 mm.
- State the density. Carbon Steel: 7,850 kg/m³ = 0.2836 lb/in³ (1 lb/in³ = 27,679.9 kg/m³).
- Weight per square foot. 0.0299 in × 144 in²/ft² × 0.2836 lb/in³ ≈ 1.221 lb/ft².
- Weight per square metre. 0.759 mm × 7.85 kg/m²/mm (density ÷ 1,000) ≈ 5.96 kg/m².
- Weight of a 4×8 ft sheet. 1.221 lb/ft² × 32 ft² ≈ 39.1 lb (17.7 kg). For a 1250×2500 mm sheet: 5.96 kg/m² × 3.125 m² ≈ 18.6 kg.
- Compare with the published chart weight. MSG defines 22 ga as 1.250 lb/ft² nominal (0.0299 in × 41.82 lb/ft² per inch). The density-based 1.221 lb/ft² is 2.4% lower because 7,850 kg/m³ equals 40.84 lb/ft² per inch, not 41.82.
Reference tables
| Chart | Thickness (in) | Thickness (mm) | lb/ft² | kg/m² | 4×8 ft sheet (lb) |
|---|---|---|---|---|---|
| Manufacturers' Standard Gauge (MSG) | 0.0299 | 0.76 | 1.221 | 5.96 | 39.1 |
| Stainless Steel Gauge (U.S. Standard progression) | 0.0313 | 0.80 | 1.303 | 6.36 | 41.7 |
| Brown & Sharpe / American Wire Gauge (AWG) | 0.0253 | 0.64 | 0.355 | 1.74 | 11.4 |
| Galvanized Sheet Gauge | 0.0336 | 0.85 | 1.372 | 6.70 | 43.9 |
The same gauge number gives a different thickness in every chart.
| Gauge | Thickness (in) | Thickness (mm) | lb/ft² | kg/m² | 4×8 ft sheet (lb) |
|---|---|---|---|---|---|
| 20 ga | 0.0359 | 0.91 | 1.466 | 7.16 | 46.9 |
| 21 ga | 0.0329 | 0.84 | 1.344 | 6.56 | 43.0 |
| 22 ga | 0.0299 | 0.76 | 1.221 | 5.96 | 39.1 |
| 23 ga | 0.0269 | 0.68 | 1.099 | 5.36 | 35.2 |
| 24 ga | 0.0239 | 0.61 | 0.976 | 4.77 | 31.2 |
Engineering and fabrication notes
22 gauge steel (0.0299 in, 0.76 mm) is thin enough that it is usually specified for non-structural work: duct and vent parts, lightweight covers, trim and shrouds. The chart weight is a round 1.250 lb/ft², easy to remember, and a 4×8 sheet comes to about 39.1 lb by density. When a drawing only says "22 gauge", remember that the same number is 0.0313 in in stainless and 0.0253 in in aluminum, so confirm the metal before you cut anything.
Adjacent sizes and comparisons
Frequently asked questions
What is the thickness of 22 gauge carbon steel (MSG)?
22 Gauge Steel is 0.0299 in or 0.76 mm on the Manufacturers' Standard Gauge (MSG) chart. Weight-defined: nominal lb/ft² ÷ 41.82 lb/ft² per inch.
How much does a 4×8 sheet of 22 gauge carbon steel (MSG) weigh?
A 4×8 ft (48 × 96 in) sheet of 22 gauge carbon steel (MSG) weighs about 39.1 lb (17.7 kg) using 7,850 kg/m³. That is 1.221 lb/ft² × 32 ft². Actual mill weight varies with thickness tolerance.
Is 22 gauge steel the same thickness as 22 gauge in other metals?
No. At 22 gauge the charts give 0.0299 in for carbon steel, 0.0313 in for stainless steel, 0.0253 in for aluminum and 0.0336 in for galvanized steel.
Why does a chart list 22 gauge steel as 1.250 lb/ft²?
Manufacturers' Standard Gauge was defined by weight: 22 ga is a nominal 1.250 lb/ft², and the thickness 0.0299 in is that weight divided by 41.82 lb/ft² per inch. True steel density gives 1.221 lb/ft², about 2.4% less.