1/2 Inch Steel Plate Weight
1/2 inch (12.70 mm) carbon steel plate weighs 20.42 lb per square foot (99.70 kg/m²). A 4×8 ft plate weighs 653 lb (296 kg) and a 1250×2500 mm plate weighs 312 kg, using 7,850 kg/m³ (0.2836 lb/in³).
- Thickness
- 0.5000 in · 12.70 mm
- Weight per ft²
- 20.42 lb
- Weight per m²
- 99.70 kg
- 4×8 ft plate
- 653 lb · 296 kg
- 1250×2500 mm plate
- 312 kg · 687 lb
- Density used
- 7,850 kg/m³ · 0.2836 lb/in³
Sheet metal gauge & plate weight calculator
One piece
653.4 lb
296.4 kg
Total × 1
653.4 lb
296.4 kg
Area per piece
32.000 ft²
2.9729 m²
Thickness
0.5000 in
12.70 mm
- Piece (L × W × T)
- 96 × 48 × 0.5 in
- Thickness
- 0.5000 in · 12.700 mm
- Nearest gauge
- Thicker than 7 ga (0.1793 in): plate, ordered by thickness
- Density
- 7,850 kg/m³ (0.2836 lb/in³)
- Area per piece
- 32.000 ft² · 2.9729 m²
- One piece
- 653.4 lb · 296.4 kg
- Total for 1 piece
- 653.4 lb · 296.4 kg
Worked calculation
- Convert the thickness. 1/2 in = 0.5000 in = 12.70 mm.
- State the density. Carbon steel: 7,850 kg/m³ = 0.2836 lb/in³ (ASTM A36 design density).
- Weight per square foot. 0.5000 in × 144 in²/ft² × 0.2836 lb/in³ ≈ 20.42 lb/ft². Shortcut: thickness × 40.84 lb/ft² per inch.
- Weight per square metre. 12.70 mm × 7.85 kg/m²/mm ≈ 99.70 kg/m².
- Weight of a 4×8 ft plate. 20.42 lb/ft² × 32 ft² ≈ 653 lb (296 kg).
- Weight of any cut piece. lb = length (in) × width (in) × 0.5000 × 0.2836. A 24 × 24 in blank: 24 × 24 × 0.5000 × 0.2836 ≈ 81.7 lb.
Reference tables
| Metal | Density (kg/m³) | lb/ft² | kg/m² | 4×8 ft (lb) | 1250×2500 mm (kg) |
|---|---|---|---|---|---|
| Carbon steel | 7,850 | 20.42 | 99.70 | 653 | 312 |
| Stainless steel | 8,000 | 20.81 | 101.60 | 666 | 318 |
| Aluminum | 2,700 | 7.02 | 34.29 | 225 | 107 |
| Brass C360 | 8,500 | 22.11 | 107.95 | 708 | 337 |
| Copper C110 | 8,940 | 23.25 | 113.54 | 744 | 355 |
Theoretical weights from nominal thickness and handbook density. Mill and supplier tolerances apply.
| Piece size | ft² | lb | kg |
|---|---|---|---|
| 12 × 12 in (1 ft²) | 1.0 | 20.4 | 9.3 |
| 24 × 24 in | 4.0 | 81.7 | 37.0 |
| 24 × 48 in | 8.0 | 163 | 74.1 |
| 48 × 96 in (4×8 ft) | 32.0 | 653 | 296 |
| 48 × 120 in (4×10 ft) | 40.0 | 817 | 370 |
| 60 × 120 in (5×10 ft) | 50.0 | 1,021 | 463 |
| 1250 × 2500 mm | 33.6 | 687 | 312 |
| Thickness | mm | lb/ft² | kg/m² | 4×8 ft (lb) | 4×8 ft (kg) |
|---|---|---|---|---|---|
| 3/16 in | 4.76 | 7.66 | 37.39 | 245 | 111 |
| 1/4 in | 6.35 | 10.21 | 49.85 | 327 | 148 |
| 5/16 in | 7.94 | 12.76 | 62.31 | 408 | 185 |
| 3/8 in | 9.52 | 15.31 | 74.77 | 490 | 222 |
| 1/2 in | 12.70 | 20.42 | 99.70 | 653 | 296 |
| 5/8 in | 15.88 | 25.52 | 124.62 | 817 | 370 |
| 3/4 in | 19.05 | 30.63 | 149.54 | 980 | 445 |
| 1 in | 25.40 | 40.84 | 199.39 | 1,307 | 593 |
Theoretical weights. ASTM A6 allows plate up to 0.01 in under the ordered thickness; over-tolerance varies with width and thickness.
Engineering and fabrication notes
1/2 in plate (12.70 mm) weighs 20.42 lb/ft² and a 4×8 ft sheet about 653 lb, so a pallet of just a few sheets reaches a freight ton quickly. It is a popular size for base plates, machine bases, heavy brackets, wear plates and fixtures. Many plate suppliers quote per pound on theoretical weight, so confirm whether a quote is on theoretical or actual scale weight before comparing prices. At this thickness the difference matters: a 0.01 in thickness variation is 2.0% of the nominal and would shift a 4×8 sheet by about 13 lb.
Adjacent sizes and comparisons
- 3/8 inch steel plate Next thinner plate
- 3/4 inch steel plate Next thicker plate
- 4×8 steel sheet weight chart Gauge 7–30 and plate
- Sheet & plate weight calculator Any size, any metal
- Sheet vs plate vs gauge: ordering Reference guide
- Theoretical vs delivered weight Reference guide
- All stock pages Plate, bar and pipe
Frequently asked questions
How much does 1/2 inch steel plate weigh per square foot?
1/2 in carbon steel plate weighs 20.42 lb/ft² (99.70 kg/m²): 0.5000 in × 144 × 0.2836 lb/in³. A quick check is thickness × 40.84 lb/ft² per inch.
How much does a 4×8 sheet of 1/2 inch steel plate weigh?
About 653 lb (296 kg): 20.42 lb/ft² × 32 ft². The 1250×2500 mm size weighs 312 kg.
What would 1/2 inch plate weigh in stainless steel or aluminum?
With 8,000 kg/m³ for stainless it is 20.81 lb/ft²; with 2,700 kg/m³ for aluminum it is 7.02 lb/ft². See the comparison table above for all five metals.
How far can 1/2 inch plate weigh from the calculated 20.42 lb/ft²?
Not exactly the same. ASTM A6 allows plate to be up to 0.01 in under the ordered thickness, which is 2.0% of 1/2 in, or about 13 lb on a 4×8 sheet. Over-tolerances depend on width and thickness. Confirm whether the supplier invoices on theoretical or scale weight.