Skip to content
StockGauge Metal gauge · plate · bar · pipe

3/4 Inch Steel Plate Weight

3/4 inch (19.05 mm) carbon steel plate weighs 30.63 lb per square foot (149.54 kg/m²). A 4×8 ft plate weighs 980 lb (445 kg) and a 1250×2500 mm plate weighs 467 kg, using 7,850 kg/m³ (0.2836 lb/in³).

Thickness
0.7500 in · 19.05 mm
Weight per ft²
30.63 lb
Weight per m²
149.54 kg
4×8 ft plate
980 lb · 445 kg
1250×2500 mm plate
467 kg · 1,030 lb
Density used
7,850 kg/m³ · 0.2836 lb/in³

Sheet metal gauge & plate weight calculator

Mode

Manufacturers' Standard Gauge (MSG). Weight-defined: nominal lb/ft² ÷ 41.82 lb/ft² per inch. Density 7,850 kg/m³ = 0.2836 lb/in³. Common handbook value for carbon and low-alloy steel (ASTM A36 design density).

Length, width and thickness use the same unit. Fractions such as 1/4 are accepted.

One piece

980.1 lb

444.6 kg

Total × 1

980.1 lb

444.6 kg

Area per piece

32.000 ft²

2.9729 m²

Thickness

0.7500 in

19.05 mm

Piece (L × W × T)
96 × 48 × 0.75 in
Thickness
0.7500 in · 19.050 mm
Nearest gauge
Thicker than 7 ga (0.1793 in): plate, ordered by thickness
Density
7,850 kg/m³ (0.2836 lb/in³)
Area per piece
32.000 ft² · 2.9729 m²
One piece
980.1 lb · 444.6 kg
Total for 1 piece
980.1 lb · 444.6 kg

Worked calculation

  1. Convert the thickness. 3/4 in = 0.7500 in = 19.05 mm.
  2. State the density. Carbon steel: 7,850 kg/m³ = 0.2836 lb/in³ (ASTM A36 design density).
  3. Weight per square foot. 0.7500 in × 144 in²/ft² × 0.2836 lb/in³ ≈ 30.63 lb/ft². Shortcut: thickness × 40.84 lb/ft² per inch.
  4. Weight per square metre. 19.05 mm × 7.85 kg/m²/mm ≈ 149.54 kg/m².
  5. Weight of a 4×8 ft plate. 30.63 lb/ft² × 32 ft² ≈ 980 lb (445 kg).
  6. Weight of any cut piece. lb = length (in) × width (in) × 0.7500 × 0.2836. A 24 × 24 in blank: 24 × 24 × 0.7500 × 0.2836 ≈ 123 lb.

Reference tables

3/4 in plate or sheet in five metals
MetalDensity (kg/m³)lb/ft²kg/m²4×8 ft (lb)1250×2500 mm (kg)
Carbon steel 7,85030.63149.54980467
Stainless steel 8,00031.21152.40999476
Aluminum 2,70010.5351.43337161
Brass C360 8,50033.16161.921,061506
Copper C110 8,94034.88170.311,116532

Theoretical weights from nominal thickness and handbook density. Mill and supplier tolerances apply.

3/4 inch carbon steel plate: weight by piece size
Piece sizeft²lbkg
12 × 12 in (1 ft²) 1.030.613.9
24 × 24 in 4.012355.6
24 × 48 in 8.0245111
48 × 96 in (4×8 ft) 32.0980445
48 × 120 in (4×10 ft) 40.01,225556
60 × 120 in (5×10 ft) 50.01,531695
1250 × 2500 mm 33.61,030467
Carbon steel plate weight by thickness
Thicknessmmlb/ft²kg/m²4×8 ft (lb)4×8 ft (kg)
3/16 in 4.767.6637.39245111
1/4 in 6.3510.2149.85327148
5/16 in 7.9412.7662.31408185
3/8 in 9.5215.3174.77490222
1/2 in 12.7020.4299.70653296
5/8 in 15.8825.52124.62817370
3/4 in 19.0530.63149.54980445
1 in 25.4040.84199.391,307593

Theoretical weights. ASTM A6 allows plate up to 0.01 in under the ordered thickness; over-tolerance varies with width and thickness.

Engineering and fabrication notes

3/4 in plate (19.05 mm) weighs 30.63 lb/ft² and a 4×8 ft sheet about 980 lb, nearly half a ton for one piece, so it is lifted with rated equipment and rarely moved by hand. It is used for heavy base plates, press and machine frames, tooling and structural connections. Because material is expensive at this weight, nesting efficiency and remnant tracking matter: the sheet is 445 kg, so a 5% scrap difference is worth about 49 lb of steel per sheet. A 12 × 12 in square, one square foot, weighs 30.63 lb.

Frequently asked questions

How much does 3/4 inch steel plate weigh per square foot?

3/4 in carbon steel plate weighs 30.63 lb/ft² (149.54 kg/m²): 0.7500 in × 144 × 0.2836 lb/in³. A quick check is thickness × 40.84 lb/ft² per inch.

How much does a 4×8 sheet of 3/4 inch steel plate weigh?

About 980 lb (445 kg): 30.63 lb/ft² × 32 ft². The 1250×2500 mm size weighs 467 kg.

What would 3/4 inch plate weigh in stainless steel or aluminum?

With 8,000 kg/m³ for stainless it is 31.21 lb/ft²; with 2,700 kg/m³ for aluminum it is 10.53 lb/ft². See the comparison table above for all five metals.

How far can 3/4 inch plate weigh from the calculated 30.63 lb/ft²?

Not exactly the same. ASTM A6 allows plate to be up to 0.01 in under the ordered thickness, which is 1.3% of 3/4 in, or about 13 lb on a 4×8 sheet. Over-tolerances depend on width and thickness. Confirm whether the supplier invoices on theoretical or scale weight.