1 Inch Schedule 40 Pipe Dimensions and Weight
NPS 1 Sch 40 pipe has a 1.315 in (33.4 mm) outside diameter, a 0.133 in (3.38 mm) wall and a 1.049 in (26.6 mm) inside diameter. Plain-end carbon steel weight is 1.68 lb/ft (2.50 kg/m), about 34 lb for a 20 ft length.
- Outside diameter
- 1.315 in · 33.4 mm
- Wall thickness
- 0.133 in · 3.38 mm
- Inside diameter
- 1.049 in · 26.6 mm
- Plain-end weight
- 1.68 lb/ft · 2.50 kg/m
- 20 ft length
- 34 lb · 15 kg
- Standard
- ASME B36.10M, carbon steel 7,850 kg/m³
Pipe schedule & weight calculator
Outside diameter
1.315 in
33.4 mm
Wall
0.133 in
3.38 mm
Inside diameter
1.049 in
26.6 mm
Per foot
1.681 lb
2.501 kg/m
Total, 20 ft
33.62 lb
15.25 kg
Schedule
Sch 40
NPS 1
- Pipe
- NPS 1, Sch 40
- Material and density
- Carbon Steel, 7,850 kg/m³ (0.2836 lb/in³)
- Outside diameter (OD)
- 1.315 in · 33.4 mm
- Wall thickness
- 0.133 in · 3.38 mm
- Inside diameter (ID)
- 1.049 in · 26.6 mm
- Plain-end weight
- 1.681 lb/ft · 2.501 kg/m
- Total for 20 ft
- 33.62 lb · 15.25 kg
- At NPS 1, Sch 40 and STD are the same wall (0.133 in).
- Plain-end weight, without coupling or threads. ASTM A53 allows ±10% on delivered weight.
Worked calculation
- Look up the outside diameter. NPS 1: OD = 1.315 in = 33.4 mm (ASME B36.10M; fixed for every schedule of this size).
- Look up the wall. Sch 40: wall = 0.133 in = 3.38 mm.
- Inside diameter. ID = OD − 2 × wall = 1.315 − 2 × 0.133 = 1.049 in (26.6 mm).
- Plain-end weight. Carbon steel, 7,850 kg/m³ (0.2836 lb/in³): lb/ft = 10.69 × (OD − wall) × wall = 10.69 × (1.315 − 0.133) × 0.133 ≈ 1.68 lb/ft.
- Metric weight. kg/m = 0.02466 × (33.40 − 3.38) × 3.38 ≈ 2.50 kg/m.
- Length of pipe. 20 ft joint: 1.68 × 20 ≈ 34 lb (15 kg).
Reference tables
| Schedule | Wall (in) | Wall (mm) | ID (in) | ID (mm) | lb/ft | kg/m |
|---|---|---|---|---|---|---|
| Sch 10 | 0.109 | 2.77 | 1.097 | 27.9 | 1.41 | 2.09 |
| Sch 40 | 0.133 | 3.38 | 1.049 | 26.6 | 1.68 | 2.50 |
| Sch 80 | 0.179 | 4.55 | 0.957 | 24.3 | 2.17 | 3.24 |
| Sch 160 | 0.250 | 6.35 | 0.815 | 20.7 | 2.85 | 4.24 |
| STD | 0.133 | 3.38 | 1.049 | 26.6 | 1.68 | 2.50 |
| XS | 0.179 | 4.55 | 0.957 | 24.3 | 2.17 | 3.24 |
| XXS | 0.358 | 9.09 | 0.599 | 15.2 | 3.66 | 5.45 |
At NPS 1, Sch 40 and STD are the same wall (0.133 in). A dash means B36.10M lists no such wall at this size.
| NPS | OD (in) | OD (mm) | Wall (in) | ID (in) | lb/ft | kg/m |
|---|---|---|---|---|---|---|
| 1/2 | 0.840 | 21.3 | 0.109 | 0.622 | 0.85 | 1.27 |
| 3/4 | 1.050 | 26.7 | 0.113 | 0.824 | 1.13 | 1.68 |
| 1 | 1.315 | 33.4 | 0.133 | 1.049 | 1.68 | 2.50 |
| 1 1/4 | 1.660 | 42.2 | 0.140 | 1.380 | 2.28 | 3.39 |
| 1 1/2 | 1.900 | 48.3 | 0.145 | 1.610 | 2.72 | 4.05 |
| Metal | Density (kg/m³) | lb/ft | kg/m | 20 ft length (lb) |
|---|---|---|---|---|
| Carbon steel | 7,850 | 1.68 | 2.50 | 34 |
| Stainless steel | 8,000 | 1.71 | 2.55 | 34 |
| Aluminum | 2,700 | 0.58 | 0.86 | 12 |
Dimensions are from ASME B36.10M. Stainless pipe is also made to ASME B36.19M with its own schedule names; check that standard for stainless-specific sizes.
Engineering and fabrication notes
NPS 1 pipe has an outside diameter of 1.315 in, not 1.000 in, and a Schedule 40 inside diameter of 1.049 in, which is the figure used for flow calculations. The wall is 0.133 in and plain-end weight is 1.68 lb/ft, so a 20 ft joint weighs about 34 lb. 1 in Sch 40 is common for handrails, light structural frames, and water, gas and air lines. Because Sch 40 and STD are the same wall at this size, a drawing that says either gives the same pipe. Threaded ends remove some wall, so do not use the plain-end weight for threaded or coupled lengths.
Adjacent sizes and comparisons
- 2 inch Schedule 40 pipe Same schedule, other size
- 4 inch Schedule 40 pipe Same schedule, other size
- 6 inch Schedule 40 pipe Same schedule, other size
- 2 inch Schedule 80 pipe Another pipe page
- Schedule 40 vs Schedule 80 pipe All sizes compared
- Pipe schedule & weight calculator Every NPS and schedule
- Pipe NPS vs OD vs schedule Reference guide
Frequently asked questions
What are the dimensions of 1 inch Schedule 40 pipe?
OD 1.315 in (33.4 mm), wall 0.133 in (3.38 mm), ID 1.049 in (26.6 mm), per ASME B36.10M.
How much does 1 inch Schedule 40 pipe weigh per foot?
1.68 lb/ft (2.50 kg/m) plain-end in carbon steel, from 10.69 × (OD − wall) × wall. A 20 ft length weighs about 34 lb. Published tables differ by about 0.1–0.3%.
Why is 1 inch Sch 40 pipe not 1 inches across?
NPS is a nominal label. For NPS 1/8 through 12 the OD is larger than the NPS number; NPS 1 pipe is 1.315 in across in every schedule, and only the wall changes. The Sch 40 wall of 0.133 in leaves a bore of 1.049 in.
Is Sch 40 the same as STD at NPS 1?
At NPS 1, Sch 40 and STD are the same wall (0.133 in).