6 Inch Schedule 40 Pipe Dimensions and Weight
NPS 6 Sch 40 pipe has a 6.625 in (168.3 mm) outside diameter, a 0.280 in (7.11 mm) wall and a 6.065 in (154.1 mm) inside diameter. Plain-end carbon steel weight is 18.99 lb/ft (28.27 kg/m), about 380 lb for a 20 ft length.
- Outside diameter
- 6.625 in · 168.3 mm
- Wall thickness
- 0.280 in · 7.11 mm
- Inside diameter
- 6.065 in · 154.1 mm
- Plain-end weight
- 18.99 lb/ft · 28.27 kg/m
- 20 ft length
- 380 lb · 172 kg
- Standard
- ASME B36.10M, carbon steel 7,850 kg/m³
Pipe schedule & weight calculator
Outside diameter
6.625 in
168.3 mm
Wall
0.280 in
7.11 mm
Inside diameter
6.065 in
154.1 mm
Per foot
18.994 lb
28.267 kg/m
Total, 20 ft
379.9 lb
172.3 kg
Schedule
Sch 40
NPS 6
- Pipe
- NPS 6, Sch 40
- Material and density
- Carbon Steel, 7,850 kg/m³ (0.2836 lb/in³)
- Outside diameter (OD)
- 6.625 in · 168.3 mm
- Wall thickness
- 0.280 in · 7.11 mm
- Inside diameter (ID)
- 6.065 in · 154.1 mm
- Plain-end weight
- 18.994 lb/ft · 28.267 kg/m
- Total for 20 ft
- 379.9 lb · 172.3 kg
- At NPS 6, Sch 40 and STD are the same wall (0.280 in).
- Plain-end weight, without coupling or threads. ASTM A53 allows ±10% on delivered weight.
Worked calculation
- Look up the outside diameter. NPS 6: OD = 6.625 in = 168.3 mm (ASME B36.10M; fixed for every schedule of this size).
- Look up the wall. Sch 40: wall = 0.280 in = 7.11 mm.
- Inside diameter. ID = OD − 2 × wall = 6.625 − 2 × 0.280 = 6.065 in (154.1 mm).
- Plain-end weight. Carbon steel, 7,850 kg/m³ (0.2836 lb/in³): lb/ft = 10.69 × (OD − wall) × wall = 10.69 × (6.625 − 0.280) × 0.280 ≈ 18.99 lb/ft.
- Metric weight. kg/m = 0.02466 × (168.27 − 7.11) × 7.11 ≈ 28.27 kg/m.
- Length of pipe. 20 ft joint: 18.99 × 20 ≈ 380 lb (172 kg).
Reference tables
| Schedule | Wall (in) | Wall (mm) | ID (in) | ID (mm) | lb/ft | kg/m |
|---|---|---|---|---|---|---|
| Sch 10 | 0.134 | 3.40 | 6.357 | 161.5 | 9.30 | 13.84 |
| Sch 40 | 0.280 | 7.11 | 6.065 | 154.1 | 18.99 | 28.27 |
| Sch 80 | 0.432 | 10.97 | 5.761 | 146.3 | 28.60 | 42.57 |
| Sch 160 | 0.719 | 18.26 | 5.187 | 131.7 | 45.40 | 67.56 |
| STD | 0.280 | 7.11 | 6.065 | 154.1 | 18.99 | 28.27 |
| XS | 0.432 | 10.97 | 5.761 | 146.3 | 28.60 | 42.57 |
| XXS | 0.864 | 21.95 | 4.897 | 124.4 | 53.22 | 79.20 |
At NPS 6, Sch 40 and STD are the same wall (0.280 in). A dash means B36.10M lists no such wall at this size.
| NPS | OD (in) | OD (mm) | Wall (in) | ID (in) | lb/ft | kg/m |
|---|---|---|---|---|---|---|
| 4 | 4.500 | 114.3 | 0.237 | 4.026 | 10.80 | 16.07 |
| 5 | 5.563 | 141.3 | 0.258 | 5.047 | 14.63 | 21.78 |
| 6 | 6.625 | 168.3 | 0.280 | 6.065 | 18.99 | 28.27 |
| 8 | 8.625 | 219.1 | 0.322 | 7.981 | 28.58 | 42.54 |
| 10 | 10.750 | 273.1 | 0.365 | 10.020 | 40.53 | 60.31 |
| Metal | Density (kg/m³) | lb/ft | kg/m | 20 ft length (lb) |
|---|---|---|---|---|
| Carbon steel | 7,850 | 18.99 | 28.27 | 380 |
| Stainless steel | 8,000 | 19.36 | 28.81 | 387 |
| Aluminum | 2,700 | 6.53 | 9.72 | 131 |
Dimensions are from ASME B36.10M. Stainless pipe is also made to ASME B36.19M with its own schedule names; check that standard for stainless-specific sizes.
Engineering and fabrication notes
NPS 6 Schedule 40 pipe has a 6.625 in outside diameter, a 0.280 in wall, a 6.065 in bore and weighs 18.99 lb/ft, about 380 lb per 20 ft joint. NPS 6 is also the last size at which the XXS wall (0.864 in) is thicker than Sch 160 (0.719 in): from NPS 8 the two swap, and Sch 160 is the heavier wall. STD and Sch 40 are the same wall here, which is only true through NPS 10. It is used for structural columns, large handrail posts, and utility and process piping where 4 in is too small.
Adjacent sizes and comparisons
- 1 inch Schedule 40 pipe Same schedule, other size
- 2 inch Schedule 40 pipe Same schedule, other size
- 4 inch Schedule 40 pipe Same schedule, other size
- 2 inch Schedule 80 pipe Another pipe page
- Schedule 40 vs Schedule 80 pipe All sizes compared
- Pipe schedule & weight calculator Every NPS and schedule
- Pipe NPS vs OD vs schedule Reference guide
Frequently asked questions
What are the dimensions of 6 inch Schedule 40 pipe?
OD 6.625 in (168.3 mm), wall 0.280 in (7.11 mm), ID 6.065 in (154.1 mm), per ASME B36.10M.
How much does 6 inch Schedule 40 pipe weigh per foot?
18.99 lb/ft (28.27 kg/m) plain-end in carbon steel, from 10.69 × (OD − wall) × wall. A 20 ft length weighs about 380 lb. Published tables differ by about 0.1–0.3%.
Why is 6 inch Sch 40 pipe not 6 inches across?
NPS is a nominal label. For NPS 1/8 through 12 the OD is larger than the NPS number; NPS 6 pipe is 6.625 in across in every schedule, and only the wall changes. The Sch 40 wall of 0.280 in leaves a bore of 6.065 in.
Is Sch 40 the same as STD at NPS 6?
At NPS 6, Sch 40 and STD are the same wall (0.280 in).