Skip to content
StockGauge Metal gauge · plate · bar · pipe

4 Inch Schedule 80 Pipe Dimensions and Weight

NPS 4 Sch 80 pipe has a 4.500 in (114.3 mm) outside diameter, a 0.337 in (8.56 mm) wall and a 3.826 in (97.2 mm) inside diameter. Plain-end carbon steel weight is 15.00 lb/ft (22.32 kg/m), about 300 lb for a 20 ft length.

Outside diameter
4.500 in · 114.3 mm
Wall thickness
0.337 in · 8.56 mm
Inside diameter
3.826 in · 97.2 mm
Plain-end weight
15.00 lb/ft · 22.32 kg/m
20 ft length
300 lb · 136 kg
Standard
ASME B36.10M, carbon steel 7,850 kg/m³

Pipe schedule & weight calculator

Outside diameter

4.500 in

114.3 mm

Wall

0.337 in

8.56 mm

Inside diameter

3.826 in

97.2 mm

Per foot

14.999 lb

22.321 kg/m

Total, 20 ft

300.0 lb

136.1 kg

Schedule

Sch 80

NPS 4

Pipe
NPS 4, Sch 80
Material and density
Carbon Steel, 7,850 kg/m³ (0.2836 lb/in³)
Outside diameter (OD)
4.500 in · 114.3 mm
Wall thickness
0.337 in · 8.56 mm
Inside diameter (ID)
3.826 in · 97.2 mm
Plain-end weight
14.999 lb/ft · 22.321 kg/m
Total for 20 ft
300.0 lb · 136.1 kg
  • At NPS 4, Sch 80 and XS are the same wall (0.337 in).
  • Plain-end weight, without coupling or threads. ASTM A53 allows ±10% on delivered weight.

Worked calculation

  1. Look up the outside diameter. NPS 4: OD = 4.500 in = 114.3 mm (ASME B36.10M; fixed for every schedule of this size).
  2. Look up the wall. Sch 80: wall = 0.337 in = 8.56 mm.
  3. Inside diameter. ID = OD − 2 × wall = 4.500 − 2 × 0.337 = 3.826 in (97.2 mm).
  4. Plain-end weight. Carbon steel, 7,850 kg/m³ (0.2836 lb/in³): lb/ft = 10.69 × (OD − wall) × wall = 10.69 × (4.500 − 0.337) × 0.337 ≈ 15.00 lb/ft.
  5. Metric weight. kg/m = 0.02466 × (114.30 − 8.56) × 8.56 ≈ 22.32 kg/m.
  6. Length of pipe. 20 ft joint: 15.00 × 20 ≈ 300 lb (136 kg).

Reference tables

NPS 4 pipe: every schedule (ASME B36.10M)
ScheduleWall (in)Wall (mm)ID (in)ID (mm)lb/ftkg/m
Sch 10 0.1203.054.260108.25.628.36
Sch 40 0.2376.024.026102.310.8016.07
Sch 80 0.3378.563.82697.215.0022.32
Sch 160 0.53113.493.43887.322.5333.53
STD 0.2376.024.026102.310.8016.07
XS 0.3378.563.82697.215.0022.32
XXS 0.67417.123.15280.127.5741.03

At NPS 4, Sch 80 and XS are the same wall (0.337 in). A dash means B36.10M lists no such wall at this size.

Sch 80 pipe: neighbouring sizes
NPSOD (in)OD (mm)Wall (in)ID (in)lb/ftkg/m
3 3.50088.90.3002.90010.2615.27
3 1/2 4.000101.60.3183.36412.5218.63
4 4.500114.30.3373.82615.0022.32
5 5.563141.30.3754.81320.8030.95
6 6.625168.30.4325.76128.6042.57
NPS 4 Sch 80 in three metals (same ASME dimensions)
MetalDensity (kg/m³)lb/ftkg/m20 ft length (lb)
Carbon steel 7,85015.0022.32300
Stainless steel 8,00015.2922.75306
Aluminum 2,7005.167.68103

Dimensions are from ASME B36.10M. Stainless pipe is also made to ASME B36.19M with its own schedule names; check that standard for stainless-specific sizes.

Engineering and fabrication notes

NPS 4 Schedule 80 pipe keeps the 4.500 in outside diameter of every NPS 4 pipe but has a 0.337 in wall, a 3.826 in bore and a plain-end weight of 15.00 lb/ft, 39% above Sch 40, so a 20 ft joint is about 300 lb. XS and Sch 80 are the same wall at NPS 4. Because the bore is smaller, flow area falls by about 10% against Sch 40, which matters for pumping and velocity calculations. This page gives dimensions and theoretical weight only; use the applicable code and your engineer for pressure design.

Frequently asked questions

What are the dimensions of 4 inch Schedule 80 pipe?

OD 4.500 in (114.3 mm), wall 0.337 in (8.56 mm), ID 3.826 in (97.2 mm), per ASME B36.10M.

How much does 4 inch Schedule 80 pipe weigh per foot?

15.00 lb/ft (22.32 kg/m) plain-end in carbon steel, from 10.69 × (OD − wall) × wall. A 20 ft length weighs about 300 lb. Published tables differ by about 0.1–0.3%.

Why is 4 inch Sch 80 pipe not 4 inches across?

NPS is a nominal label. For NPS 1/8 through 12 the OD is larger than the NPS number; NPS 4 pipe is 4.500 in across in every schedule, and only the wall changes. The Sch 80 wall of 0.337 in leaves a bore of 3.826 in.

Is Sch 80 the same as XS at NPS 4?

At NPS 4, Sch 80 and XS are the same wall (0.337 in).