14 Gauge Steel vs 14 Gauge Aluminum
14 Gauge Steel is 0.0747 in (1.90 mm) and weighs 3.051 lb/ft². 14 Gauge Aluminum is 0.0641 in (1.63 mm) and weighs 0.900 lb/ft². The aluminum sheet is 14.2% thinner and weighs 29.5% as much per square foot; a 4×8 ft sheet is 28.8 lb against 97.6 lb.
- 14 Gauge Steel
- 0.0747 in · 3.051 lb/ft²
- 14 Gauge Aluminum
- 0.0641 in · 0.900 lb/ft²
- Weight ratio
- 29.5% (aluminum ÷ steel)
- Equal-weight thickness
- 0.2172 in
Sheet metal gauge & plate weight calculator
Thickness
0.0747 in
1.90 mm
Per ft²
3.051 lb
14.89 kg/m²
4 × 8 ft sheet
97.62 lb
44.28 kg
1250 × 2500 mm
46.55 kg
102.6 lb
- Gauge standard
- Manufacturers' Standard Gauge (MSG)
- Thickness
- 0.0747 in · 1.897 mm
- Nearest gauge
- 14 ga on the MSG chart
- Density
- 7,850 kg/m³ (0.2836 lb/in³)
- Weight per ft²
- 3.051 lb
- Weight per m²
- 14.89 kg
- 4 × 8 ft (48 × 96 in) sheet (32 ft²)
- 97.62 lb · 44.28 kg
- 1250 × 2500 mm sheet (3.125 m²)
- 102.6 lb · 46.55 kg
- Published MSG charts list 3.125 lb/ft² for 14 ga because they use 41.82 lb/ft² per inch. Density-based weight is 3.051 lb/ft² (40.84 lb/ft² per inch).
Worked calculation
- 14 Gauge Steel thickness. Manufacturers' Standard Gauge (MSG): 14 ga = 0.0747 in = 1.90 mm.
- 14 Gauge Aluminum thickness. Brown & Sharpe / American Wire Gauge (AWG): 14 ga = 0.0641 in = 1.63 mm.
- Weight per square foot. 14 Gauge Steel (7,850 kg/m³ = 0.2836 lb/in³): 0.0747 × 144 × 0.2836 ≈ 3.051 lb/ft². 14 Gauge Aluminum (2,700 kg/m³ = 0.0975 lb/in³): 0.0641 × 144 × 0.0975 ≈ 0.900 lb/ft².
- Ratio. 0.900 ÷ 3.051 ≈ 0.295, so aluminum weighs 29.5% of the steel sheet per square foot.
- Equal-weight thickness. To weigh the same as 14 gauge steel, aluminum would be 0.0747 × 7,850 ÷ 2,700 ≈ 0.2172 in (5.52 mm) thick.
Reference tables
| Property | 14 Gauge Steel | 14 Gauge Aluminum | Aluminum vs steel |
|---|---|---|---|
| Gauge standard | Manufacturers' Standard Gauge (MSG) | Brown & Sharpe / American Wire Gauge (AWG) | — |
| Thickness (in) | 0.0747 | 0.0641 | -14.2% |
| Thickness (mm) | 1.90 | 1.63 | -14.2% |
| Density (kg/m³) | 7,850 | 2,700 | -65.6% |
| Weight (lb/ft²) | 3.051 | 0.900 | -70.5% |
| Weight (kg/m²) | 14.89 | 4.40 | -70.5% |
| 4×8 ft sheet (lb) | 97.6 | 28.8 | -70.5% |
| 1250×2500 mm sheet (kg) | 46.5 | 13.7 | -70.5% |
Theoretical weights from chart thickness and handbook density.
| Gauge | MSG (in) | B&S / AWG (in) | MSG lb/ft² | B&S / AWG lb/ft² |
|---|---|---|---|---|
| 12 ga | 0.1046 | 0.0808 | 4.272 | 1.135 |
| 13 ga | 0.0897 | 0.0720 | 3.663 | 1.011 |
| 14 ga | 0.0747 | 0.0641 | 3.051 | 0.900 |
| 15 ga | 0.0673 | 0.0571 | 2.748 | 0.802 |
| 16 ga | 0.0598 | 0.0508 | 2.442 | 0.714 |
Engineering and fabrication notes
Swapping 14 gauge steel for 14 gauge aluminum looks like a like-for-like change, but the two gauge numbers belong to different charts. The aluminum sheet is 14.2% thinner and weighs only 29.5% as much per square foot, which is the saving designers are after. The catch is stiffness. Bending stiffness per unit width scales with elastic modulus times thickness cubed, and aluminum's modulus (about 69 GPa) is roughly one third of steel's (about 200 GPa). Matching the stiffness of 14 gauge steel therefore takes aluminum about 1.4 times thicker, near 0.107 in, and at that thickness the part is still roughly half the weight of the steel one.
Adjacent sizes and comparisons
- 14 Gauge Steel Full page and calculator
- 14 Gauge Aluminum Full page and calculator
- 16 gauge steel vs 16 gauge aluminum Another comparison
- 16 gauge steel vs 16 gauge stainless Another comparison
- Sheet & plate weight calculator Any thickness, any size
- Why 16 gauge is not one thickness Reference guide
- All comparisons Browse every comparison page
Frequently asked questions
Is 14 gauge steel thicker than 14 gauge aluminum?
14 Gauge Aluminum is 0.0641 in and 14 gauge steel is 0.0747 in, so the aluminum sheet is 14.2% thinner. They follow different charts: Manufacturers' Standard Gauge (MSG) and Brown & Sharpe / American Wire Gauge (AWG).
How much heavier is steel than aluminum at 14 gauge?
A 4×8 ft sheet of 14 gauge steel weighs about 97.6 lb and 14 gauge aluminum about 28.8 lb, using 7,850 and 2,700 kg/m³. The aluminum sheet weighs 29.5% of the other per square foot.
What thickness of aluminum weighs the same as 14 gauge steel?
Aluminum would need to be about 0.2172 in (5.52 mm) thick to match the weight per square foot of 14 gauge steel, because the density ratio is 7,850 : 2,700.