Skip to content
StockGauge Metal gauge · plate · bar · pipe

14 Gauge Steel Thickness and Weight

A 14 gauge carbon steel (MSG) sheet is 0.0747 in (1.897 mm) thick. At 7,850 kg/m³ (0.2836 lb/in³) it weighs 3.051 lb/ft² (14.89 kg/m²), so a 4×8 ft sheet weighs 97.6 lb (44.3 kg) and a 1250×2500 mm sheet weighs 46.5 kg (103 lb).

Thickness
0.0747 in · 1.897 mm
Weight per ft²
3.051 lb
Weight per m²
14.89 kg
4×8 ft sheet
97.6 lb · 44.3 kg
1250×2500 mm sheet
46.5 kg · 103 lb
Density used
7,850 kg/m³ · 0.2836 lb/in³

Sheet metal gauge & plate weight calculator

Mode

Manufacturers' Standard Gauge (MSG). Weight-defined: nominal lb/ft² ÷ 41.82 lb/ft² per inch. Density 7,850 kg/m³ = 0.2836 lb/in³. Common handbook value for carbon and low-alloy steel (ASTM A36 design density).

Thickness

0.0747 in

1.90 mm

Per ft²

3.051 lb

14.89 kg/m²

4 × 8 ft sheet

97.62 lb

44.28 kg

1250 × 2500 mm

46.55 kg

102.6 lb

Gauge standard
Manufacturers' Standard Gauge (MSG)
Thickness
0.0747 in · 1.897 mm
Nearest gauge
14 ga on the MSG chart
Density
7,850 kg/m³ (0.2836 lb/in³)
Weight per ft²
3.051 lb
Weight per m²
14.89 kg
4 × 8 ft (48 × 96 in) sheet (32 ft²)
97.62 lb · 44.28 kg
1250 × 2500 mm sheet (3.125 m²)
102.6 lb · 46.55 kg
  • Published MSG charts list 3.125 lb/ft² for 14 ga because they use 41.82 lb/ft² per inch. Density-based weight is 3.051 lb/ft² (40.84 lb/ft² per inch).

Worked calculation

  1. Look up the thickness. Manufacturers' Standard Gauge (MSG), 14 ga = 0.0747 in. In millimetres: 0.0747 × 25.4 = 1.897 mm.
  2. State the density. Carbon Steel: 7,850 kg/m³ = 0.2836 lb/in³ (1 lb/in³ = 27,679.9 kg/m³).
  3. Weight per square foot. 0.0747 in × 144 in²/ft² × 0.2836 lb/in³ ≈ 3.051 lb/ft².
  4. Weight per square metre. 1.897 mm × 7.85 kg/m²/mm (density ÷ 1,000) ≈ 14.89 kg/m².
  5. Weight of a 4×8 ft sheet. 3.051 lb/ft² × 32 ft² ≈ 97.6 lb (44.3 kg). For a 1250×2500 mm sheet: 14.89 kg/m² × 3.125 m² ≈ 46.5 kg.
  6. Compare with the published chart weight. MSG defines 14 ga as 3.125 lb/ft² nominal (0.0747 in × 41.82 lb/ft² per inch). The density-based 3.051 lb/ft² is 2.4% lower because 7,850 kg/m³ equals 40.84 lb/ft² per inch, not 41.82.

Reference tables

14 gauge in each chart (density-based weights)
ChartThickness (in)Thickness (mm)lb/ft²kg/m²4×8 ft sheet (lb)
Manufacturers' Standard Gauge (MSG) 0.07471.903.05114.8997.6
Stainless Steel Gauge (U.S. Standard progression) 0.07811.983.25015.87104
Brown & Sharpe / American Wire Gauge (AWG) 0.06411.630.9004.4028.8
Galvanized Sheet Gauge 0.07851.993.20615.65103

The same gauge number gives a different thickness in every chart.

MSG gauges around 14 ga
GaugeThickness (in)Thickness (mm)lb/ft²kg/m²4×8 ft sheet (lb)
12 ga 0.10462.664.27220.86137
13 ga 0.08972.283.66317.89117
14 ga 0.07471.903.05114.8997.6
15 ga 0.06731.712.74813.4287.9
16 ga 0.05981.522.44211.9278.1

Engineering and fabrication notes

14 gauge (0.0747 in, 1.90 mm) is the everyday workhorse of sheet metal fabrication: stiff enough for chassis, brackets, enclosures and equipment panels, yet thin enough to laser cut, punch and bend on a modest press brake. It is about 4% thinner than 5/64 in (0.0781 in), which is exactly the stainless 14 gauge thickness, so quotes that mix the two metals drift by that amount. The chart weight is 3.125 lb/ft² against 3.051 lb/ft² by density, and a 4×8 sheet weighs roughly 97.6 lb.

Frequently asked questions

What is the thickness of 14 gauge carbon steel (MSG)?

14 Gauge Steel is 0.0747 in or 1.90 mm on the Manufacturers' Standard Gauge (MSG) chart. Weight-defined: nominal lb/ft² ÷ 41.82 lb/ft² per inch.

How much does a 4×8 sheet of 14 gauge carbon steel (MSG) weigh?

A 4×8 ft (48 × 96 in) sheet of 14 gauge carbon steel (MSG) weighs about 97.6 lb (44.3 kg) using 7,850 kg/m³. That is 3.051 lb/ft² × 32 ft². Actual mill weight varies with thickness tolerance.

Is 14 gauge steel the same thickness as 14 gauge in other metals?

No. At 14 gauge the charts give 0.0747 in for carbon steel, 0.0781 in for stainless steel, 0.0641 in for aluminum and 0.0785 in for galvanized steel.

Why does a chart list 14 gauge steel as 3.125 lb/ft²?

Manufacturers' Standard Gauge was defined by weight: 14 ga is a nominal 3.125 lb/ft², and the thickness 0.0747 in is that weight divided by 41.82 lb/ft² per inch. True steel density gives 3.051 lb/ft², about 2.4% less.