Skip to content
StockGauge Metal gauge · plate · bar · pipe

12 Gauge Steel Thickness and Weight

A 12 gauge carbon steel (MSG) sheet is 0.1046 in (2.657 mm) thick. At 7,850 kg/m³ (0.2836 lb/in³) it weighs 4.272 lb/ft² (20.86 kg/m²), so a 4×8 ft sheet weighs 137 lb (62.0 kg) and a 1250×2500 mm sheet weighs 65.2 kg (144 lb).

Thickness
0.1046 in · 2.657 mm
Weight per ft²
4.272 lb
Weight per m²
20.86 kg
4×8 ft sheet
137 lb · 62.0 kg
1250×2500 mm sheet
65.2 kg · 144 lb
Density used
7,850 kg/m³ · 0.2836 lb/in³

Sheet metal gauge & plate weight calculator

Mode

Manufacturers' Standard Gauge (MSG). Weight-defined: nominal lb/ft² ÷ 41.82 lb/ft² per inch. Density 7,850 kg/m³ = 0.2836 lb/in³. Common handbook value for carbon and low-alloy steel (ASTM A36 design density).

Thickness

0.1046 in

2.66 mm

Per ft²

4.272 lb

20.86 kg/m²

4 × 8 ft sheet

136.7 lb

62.00 kg

1250 × 2500 mm

65.18 kg

143.7 lb

Gauge standard
Manufacturers' Standard Gauge (MSG)
Thickness
0.1046 in · 2.657 mm
Nearest gauge
12 ga on the MSG chart
Density
7,850 kg/m³ (0.2836 lb/in³)
Weight per ft²
4.272 lb
Weight per m²
20.86 kg
4 × 8 ft (48 × 96 in) sheet (32 ft²)
136.7 lb · 62.00 kg
1250 × 2500 mm sheet (3.125 m²)
143.7 lb · 65.18 kg
  • Published MSG charts list 4.375 lb/ft² for 12 ga because they use 41.82 lb/ft² per inch. Density-based weight is 4.272 lb/ft² (40.84 lb/ft² per inch).

Worked calculation

  1. Look up the thickness. Manufacturers' Standard Gauge (MSG), 12 ga = 0.1046 in. In millimetres: 0.1046 × 25.4 = 2.657 mm.
  2. State the density. Carbon Steel: 7,850 kg/m³ = 0.2836 lb/in³ (1 lb/in³ = 27,679.9 kg/m³).
  3. Weight per square foot. 0.1046 in × 144 in²/ft² × 0.2836 lb/in³ ≈ 4.272 lb/ft².
  4. Weight per square metre. 2.657 mm × 7.85 kg/m²/mm (density ÷ 1,000) ≈ 20.86 kg/m².
  5. Weight of a 4×8 ft sheet. 4.272 lb/ft² × 32 ft² ≈ 137 lb (62.0 kg). For a 1250×2500 mm sheet: 20.86 kg/m² × 3.125 m² ≈ 65.2 kg.
  6. Compare with the published chart weight. MSG defines 12 ga as 4.375 lb/ft² nominal (0.1046 in × 41.82 lb/ft² per inch). The density-based 4.272 lb/ft² is 2.4% lower because 7,850 kg/m³ equals 40.84 lb/ft² per inch, not 41.82.

Reference tables

12 gauge in each chart (density-based weights)
ChartThickness (in)Thickness (mm)lb/ft²kg/m²4×8 ft sheet (lb)
Manufacturers' Standard Gauge (MSG) 0.10462.664.27220.86137
Stainless Steel Gauge (U.S. Standard progression) 0.10942.784.55322.23146
Brown & Sharpe / American Wire Gauge (AWG) 0.08082.051.1355.5436.3
Galvanized Sheet Gauge 0.10842.754.42721.61142

The same gauge number gives a different thickness in every chart.

MSG gauges around 12 ga
GaugeThickness (in)Thickness (mm)lb/ft²kg/m²4×8 ft sheet (lb)
10 ga 0.13453.425.49326.82176
11 ga 0.11963.044.88423.85156
12 ga 0.10462.664.27220.86137
13 ga 0.08972.283.66317.89117
14 ga 0.07471.903.05114.8997.6

Engineering and fabrication notes

12 gauge steel at 0.1046 in (2.66 mm) falls between 3/32 in (0.0938) and 7/64 in (0.1094), so no common fractional plate matches it. It is a frequent choice for mounting plates, machine covers, brackets and equipment skins where 14 gauge is too flexible and 10 gauge is overkill. The chart weight is 4.375 lb/ft² while thickness × true steel density gives 4.272 lb/ft², a 2.4% gap that adds up to a few pounds on a full sheet: 140 lb by the chart against 137 lb by density.

Frequently asked questions

What is the thickness of 12 gauge carbon steel (MSG)?

12 Gauge Steel is 0.1046 in or 2.66 mm on the Manufacturers' Standard Gauge (MSG) chart. Weight-defined: nominal lb/ft² ÷ 41.82 lb/ft² per inch.

How much does a 4×8 sheet of 12 gauge carbon steel (MSG) weigh?

A 4×8 ft (48 × 96 in) sheet of 12 gauge carbon steel (MSG) weighs about 137 lb (62.0 kg) using 7,850 kg/m³. That is 4.272 lb/ft² × 32 ft². Actual mill weight varies with thickness tolerance.

Is 12 gauge steel the same thickness as 12 gauge in other metals?

No. At 12 gauge the charts give 0.1046 in for carbon steel, 0.1094 in for stainless steel, 0.0808 in for aluminum and 0.1084 in for galvanized steel.

Why does a chart list 12 gauge steel as 4.375 lb/ft²?

Manufacturers' Standard Gauge was defined by weight: 12 ga is a nominal 4.375 lb/ft², and the thickness 0.1046 in is that weight divided by 41.82 lb/ft² per inch. True steel density gives 4.272 lb/ft², about 2.4% less.