Skip to content
StockGauge Metal gauge · plate · bar · pipe

10 Gauge Steel Thickness and Weight

A 10 gauge carbon steel (MSG) sheet is 0.1345 in (3.416 mm) thick. At 7,850 kg/m³ (0.2836 lb/in³) it weighs 5.493 lb/ft² (26.82 kg/m²), so a 4×8 ft sheet weighs 176 lb (79.7 kg) and a 1250×2500 mm sheet weighs 83.8 kg (185 lb).

Thickness
0.1345 in · 3.416 mm
Weight per ft²
5.493 lb
Weight per m²
26.82 kg
4×8 ft sheet
176 lb · 79.7 kg
1250×2500 mm sheet
83.8 kg · 185 lb
Density used
7,850 kg/m³ · 0.2836 lb/in³

Sheet metal gauge & plate weight calculator

Mode

Manufacturers' Standard Gauge (MSG). Weight-defined: nominal lb/ft² ÷ 41.82 lb/ft² per inch. Density 7,850 kg/m³ = 0.2836 lb/in³. Common handbook value for carbon and low-alloy steel (ASTM A36 design density).

Thickness

0.1345 in

3.42 mm

Per ft²

5.493 lb

26.82 kg/m²

4 × 8 ft sheet

175.8 lb

79.73 kg

1250 × 2500 mm

83.81 kg

184.8 lb

Gauge standard
Manufacturers' Standard Gauge (MSG)
Thickness
0.1345 in · 3.416 mm
Nearest gauge
10 ga on the MSG chart
Density
7,850 kg/m³ (0.2836 lb/in³)
Weight per ft²
5.493 lb
Weight per m²
26.82 kg
4 × 8 ft (48 × 96 in) sheet (32 ft²)
175.8 lb · 79.73 kg
1250 × 2500 mm sheet (3.125 m²)
184.8 lb · 83.81 kg
  • Published MSG charts list 5.625 lb/ft² for 10 ga because they use 41.82 lb/ft² per inch. Density-based weight is 5.493 lb/ft² (40.84 lb/ft² per inch).

Worked calculation

  1. Look up the thickness. Manufacturers' Standard Gauge (MSG), 10 ga = 0.1345 in. In millimetres: 0.1345 × 25.4 = 3.416 mm.
  2. State the density. Carbon Steel: 7,850 kg/m³ = 0.2836 lb/in³ (1 lb/in³ = 27,679.9 kg/m³).
  3. Weight per square foot. 0.1345 in × 144 in²/ft² × 0.2836 lb/in³ ≈ 5.493 lb/ft².
  4. Weight per square metre. 3.416 mm × 7.85 kg/m²/mm (density ÷ 1,000) ≈ 26.82 kg/m².
  5. Weight of a 4×8 ft sheet. 5.493 lb/ft² × 32 ft² ≈ 176 lb (79.7 kg). For a 1250×2500 mm sheet: 26.82 kg/m² × 3.125 m² ≈ 83.8 kg.
  6. Compare with the published chart weight. MSG defines 10 ga as 5.625 lb/ft² nominal (0.1345 in × 41.82 lb/ft² per inch). The density-based 5.493 lb/ft² is 2.4% lower because 7,850 kg/m³ equals 40.84 lb/ft² per inch, not 41.82.

Reference tables

10 gauge in each chart (density-based weights)
ChartThickness (in)Thickness (mm)lb/ft²kg/m²4×8 ft sheet (lb)
Manufacturers' Standard Gauge (MSG) 0.13453.425.49326.82176
Stainless Steel Gauge (U.S. Standard progression) 0.14063.575.85228.57187
Brown & Sharpe / American Wire Gauge (AWG) 0.10192.591.4316.9945.8
Galvanized Sheet Gauge 0.13823.515.64427.56181

The same gauge number gives a different thickness in every chart.

MSG gauges around 10 ga
GaugeThickness (in)Thickness (mm)lb/ft²kg/m²4×8 ft sheet (lb)
8 ga 0.16444.186.71432.78215
9 ga 0.14953.806.10529.81195
10 ga 0.13453.425.49326.82176
11 ga 0.11963.044.88423.85156
12 ga 0.10462.664.27220.86137

Engineering and fabrication notes

10 gauge is where sheet starts to behave like light plate. At 0.1345 in (3.42 mm) it is thick enough for machine guards, equipment bases, and trailer and truck-body brackets that would otherwise be 1/8 in plate. It is also where forming gets demanding: bend tonnage for a given die opening scales with the square of thickness, so check your press brake capacity and tooling before quoting 10 gauge parts. A full 4×8 sheet weighs about 176 lb by density (180 lb by the chart), which means a lift or two people, not one.

Frequently asked questions

What is the thickness of 10 gauge carbon steel (MSG)?

10 Gauge Steel is 0.1345 in or 3.42 mm on the Manufacturers' Standard Gauge (MSG) chart. Weight-defined: nominal lb/ft² ÷ 41.82 lb/ft² per inch.

How much does a 4×8 sheet of 10 gauge carbon steel (MSG) weigh?

A 4×8 ft (48 × 96 in) sheet of 10 gauge carbon steel (MSG) weighs about 176 lb (79.7 kg) using 7,850 kg/m³. That is 5.493 lb/ft² × 32 ft². Actual mill weight varies with thickness tolerance.

Is 10 gauge steel the same thickness as 10 gauge in other metals?

No. At 10 gauge the charts give 0.1345 in for carbon steel, 0.1406 in for stainless steel, 0.1019 in for aluminum and 0.1382 in for galvanized steel.

Why does a chart list 10 gauge steel as 5.625 lb/ft²?

Manufacturers' Standard Gauge was defined by weight: 10 ga is a nominal 5.625 lb/ft², and the thickness 0.1345 in is that weight divided by 41.82 lb/ft² per inch. True steel density gives 5.493 lb/ft², about 2.4% less.