10 Gauge Aluminum Thickness and Weight
A 10 gauge aluminum (Brown & Sharpe) sheet is 0.1019 in (2.588 mm) thick. At 2,700 kg/m³ (0.0975 lb/in³) it weighs 1.431 lb/ft² (6.99 kg/m²), so a 4×8 ft sheet weighs 45.8 lb (20.8 kg) and a 1250×2500 mm sheet weighs 21.8 kg (48.1 lb).
- Thickness
- 0.1019 in · 2.588 mm
- Weight per ft²
- 1.431 lb
- Weight per m²
- 6.99 kg
- 4×8 ft sheet
- 45.8 lb · 20.8 kg
- 1250×2500 mm sheet
- 21.8 kg · 48.1 lb
- Density used
- 2,700 kg/m³ · 0.0975 lb/in³
Sheet metal gauge & plate weight calculator
Thickness
0.1019 in
2.59 mm
Per ft²
1.431 lb
6.99 kg/m²
4 × 8 ft sheet
45.80 lb
20.78 kg
1250 × 2500 mm
21.84 kg
48.15 lb
- Gauge standard
- Brown & Sharpe / American Wire Gauge (AWG)
- Thickness
- 0.1019 in · 2.588 mm
- Nearest gauge
- 10 ga on the B&S / AWG chart
- Density
- 2,700 kg/m³ (0.0975 lb/in³)
- Weight per ft²
- 1.431 lb
- Weight per m²
- 6.99 kg
- 4 × 8 ft (48 × 96 in) sheet (32 ft²)
- 45.80 lb · 20.78 kg
- 1250 × 2500 mm sheet (3.125 m²)
- 48.15 lb · 21.84 kg
Worked calculation
- Look up the thickness. Brown & Sharpe / American Wire Gauge (AWG), 10 ga = 0.1019 in. In millimetres: 0.1019 × 25.4 = 2.588 mm.
- State the density. Aluminum 6061 / 5052: 2,700 kg/m³ = 0.0975 lb/in³ (1 lb/in³ = 27,679.9 kg/m³).
- Weight per square foot. 0.1019 in × 144 in²/ft² × 0.0975 lb/in³ ≈ 1.431 lb/ft².
- Weight per square metre. 2.588 mm × 2.70 kg/m²/mm (density ÷ 1,000) ≈ 6.99 kg/m².
- Weight of a 4×8 ft sheet. 1.431 lb/ft² × 32 ft² ≈ 45.8 lb (20.8 kg). For a 1250×2500 mm sheet: 6.99 kg/m² × 3.125 m² ≈ 21.8 kg.
- Compare with the published chart weight. MSG defines 10 ga as 5.625 lb/ft² nominal (0.1019 in × 41.82 lb/ft² per inch). The density-based 1.431 lb/ft² is 293.0% lower because 7,850 kg/m³ equals 40.84 lb/ft² per inch, not 41.82.
Reference tables
| Chart | Thickness (in) | Thickness (mm) | lb/ft² | kg/m² | 4×8 ft sheet (lb) |
|---|---|---|---|---|---|
| Manufacturers' Standard Gauge (MSG) | 0.1345 | 3.42 | 5.493 | 26.82 | 176 |
| Stainless Steel Gauge (U.S. Standard progression) | 0.1406 | 3.57 | 5.852 | 28.57 | 187 |
| Brown & Sharpe / American Wire Gauge (AWG) | 0.1019 | 2.59 | 1.431 | 6.99 | 45.8 |
| Galvanized Sheet Gauge | 0.1382 | 3.51 | 5.644 | 27.56 | 181 |
The same gauge number gives a different thickness in every chart.
| Gauge | Thickness (in) | Thickness (mm) | lb/ft² | kg/m² | 4×8 ft sheet (lb) |
|---|---|---|---|---|---|
| 8 ga | 0.1285 | 3.26 | 1.805 | 8.81 | 57.8 |
| 9 ga | 0.1144 | 2.91 | 1.607 | 7.85 | 51.4 |
| 10 ga | 0.1019 | 2.59 | 1.431 | 6.99 | 45.8 |
| 11 ga | 0.0907 | 2.30 | 1.274 | 6.22 | 40.8 |
| 12 ga | 0.0808 | 2.05 | 1.135 | 5.54 | 36.3 |
Engineering and fabrication notes
10 gauge aluminum is 0.1019 in (2.59 mm), about 2% thicker than the common 0.100 in stock sheet that suppliers list instead of a gauge number. It weighs only 1.431 lb/ft², so a 4×8 sheet is about 45.8 lb, roughly one third the weight of steel sheet of the same thickness. Typical uses include truck and trailer panels, enclosures, machine covers and marine or outdoor parts where corrosion resistance and weight matter. Order by decimal thickness and alloy (5052, 6061 or 3003) to avoid gauge ambiguity.
Adjacent sizes and comparisons
Frequently asked questions
What is the thickness of 10 gauge aluminum (Brown & Sharpe)?
10 Gauge Aluminum is 0.1019 in or 2.59 mm on the Brown & Sharpe / American Wire Gauge (AWG) chart. Geometric: d(n) = 0.005 × 92^((36 − n) / 39) in.
How much does a 4×8 sheet of 10 gauge aluminum (Brown & Sharpe) weigh?
A 4×8 ft (48 × 96 in) sheet of 10 gauge aluminum (Brown & Sharpe) weighs about 45.8 lb (20.8 kg) using 2,700 kg/m³. That is 1.431 lb/ft² × 32 ft². Actual mill weight varies with thickness tolerance.
Is 10 gauge aluminum the same thickness as 10 gauge in other metals?
No. At 10 gauge the charts give 0.1345 in for carbon steel, 0.1406 in for stainless steel, 0.1019 in for aluminum and 0.1382 in for galvanized steel.
What decimal thickness is closest to 10 gauge aluminum?
Aluminum gauge follows Brown & Sharpe / AWG: thickness = 0.005 × 92^((36 − 10) ÷ 39) = 0.1019 in. Of the round decimal thicknesses suppliers commonly stock (0.040, 0.050, 0.063, 0.080 and 0.100 in), 0.100 in is nearest, 1.9% thinner than the gauge value. Order by decimal thickness and alloy rather than by gauge number.