Skip to content
StockGauge Metal gauge · plate · bar · pipe

12 Gauge Aluminum Thickness and Weight

A 12 gauge aluminum (Brown & Sharpe) sheet is 0.0808 in (2.052 mm) thick. At 2,700 kg/m³ (0.0975 lb/in³) it weighs 1.135 lb/ft² (5.54 kg/m²), so a 4×8 ft sheet weighs 36.3 lb (16.5 kg) and a 1250×2500 mm sheet weighs 17.3 kg (38.2 lb).

Thickness
0.0808 in · 2.052 mm
Weight per ft²
1.135 lb
Weight per m²
5.54 kg
4×8 ft sheet
36.3 lb · 16.5 kg
1250×2500 mm sheet
17.3 kg · 38.2 lb
Density used
2,700 kg/m³ · 0.0975 lb/in³

Sheet metal gauge & plate weight calculator

Mode

Brown & Sharpe / American Wire Gauge (AWG). Geometric: d(n) = 0.005 × 92^((36 − n) / 39) in. Density 2,700 kg/m³ = 0.0975 lb/in³. 6061 is about 2,700 kg/m³; 5052 is listed slightly lower (about 2,680) by some sources, a 0.7% difference.

Thickness

0.0808 in

2.05 mm

Per ft²

1.135 lb

5.54 kg/m²

4 × 8 ft sheet

36.32 lb

16.47 kg

1250 × 2500 mm

17.32 kg

38.18 lb

Gauge standard
Brown & Sharpe / American Wire Gauge (AWG)
Thickness
0.0808 in · 2.052 mm
Nearest gauge
12 ga on the B&S / AWG chart
Density
2,700 kg/m³ (0.0975 lb/in³)
Weight per ft²
1.135 lb
Weight per m²
5.54 kg
4 × 8 ft (48 × 96 in) sheet (32 ft²)
36.32 lb · 16.47 kg
1250 × 2500 mm sheet (3.125 m²)
38.18 lb · 17.32 kg

Worked calculation

  1. Look up the thickness. Brown & Sharpe / American Wire Gauge (AWG), 12 ga = 0.0808 in. In millimetres: 0.0808 × 25.4 = 2.052 mm.
  2. State the density. Aluminum 6061 / 5052: 2,700 kg/m³ = 0.0975 lb/in³ (1 lb/in³ = 27,679.9 kg/m³).
  3. Weight per square foot. 0.0808 in × 144 in²/ft² × 0.0975 lb/in³ ≈ 1.135 lb/ft².
  4. Weight per square metre. 2.052 mm × 2.70 kg/m²/mm (density ÷ 1,000) ≈ 5.54 kg/m².
  5. Weight of a 4×8 ft sheet. 1.135 lb/ft² × 32 ft² ≈ 36.3 lb (16.5 kg). For a 1250×2500 mm sheet: 5.54 kg/m² × 3.125 m² ≈ 17.3 kg.
  6. Compare with the published chart weight. MSG defines 12 ga as 4.375 lb/ft² nominal (0.0808 in × 41.82 lb/ft² per inch). The density-based 1.135 lb/ft² is 285.5% lower because 7,850 kg/m³ equals 40.84 lb/ft² per inch, not 41.82.

Reference tables

12 gauge in each chart (density-based weights)
ChartThickness (in)Thickness (mm)lb/ft²kg/m²4×8 ft sheet (lb)
Manufacturers' Standard Gauge (MSG) 0.10462.664.27220.86137
Stainless Steel Gauge (U.S. Standard progression) 0.10942.784.55322.23146
Brown & Sharpe / American Wire Gauge (AWG) 0.08082.051.1355.5436.3
Galvanized Sheet Gauge 0.10842.754.42721.61142

The same gauge number gives a different thickness in every chart.

B&S / AWG gauges around 12 ga
GaugeThickness (in)Thickness (mm)lb/ft²kg/m²4×8 ft sheet (lb)
10 ga 0.10192.591.4316.9945.8
11 ga 0.09072.301.2746.2240.8
12 ga 0.08082.051.1355.5436.3
13 ga 0.07201.831.0114.9432.4
14 ga 0.06411.630.9004.4028.8

Engineering and fabrication notes

12 gauge aluminum is 0.0808 in (2.05 mm), within about 1% of 0.080 in, a thickness widely stocked for sign blanks, enclosures and panels. The gap is under 0.001 in, immaterial for weight estimates, but a new design should still specify 0.080 in and the alloy directly. At 1.135 lb/ft² a 4×8 sheet weighs about 36.3 lb. The same gauge number is 0.1046 in in carbon steel, which is why aluminum and steel parts labelled "12 gauge" are not interchangeable in thickness.

Frequently asked questions

What is the thickness of 12 gauge aluminum (Brown & Sharpe)?

12 Gauge Aluminum is 0.0808 in or 2.05 mm on the Brown & Sharpe / American Wire Gauge (AWG) chart. Geometric: d(n) = 0.005 × 92^((36 − n) / 39) in.

How much does a 4×8 sheet of 12 gauge aluminum (Brown & Sharpe) weigh?

A 4×8 ft (48 × 96 in) sheet of 12 gauge aluminum (Brown & Sharpe) weighs about 36.3 lb (16.5 kg) using 2,700 kg/m³. That is 1.135 lb/ft² × 32 ft². Actual mill weight varies with thickness tolerance.

Is 12 gauge aluminum the same thickness as 12 gauge in other metals?

No. At 12 gauge the charts give 0.1046 in for carbon steel, 0.1094 in for stainless steel, 0.0808 in for aluminum and 0.1084 in for galvanized steel.

What decimal thickness is closest to 12 gauge aluminum?

Aluminum gauge follows Brown & Sharpe / AWG: thickness = 0.005 × 92^((36 − 12) ÷ 39) = 0.0808 in. Of the round decimal thicknesses suppliers commonly stock (0.040, 0.050, 0.063, 0.080 and 0.100 in), 0.080 in is nearest, 1.0% thinner than the gauge value. Order by decimal thickness and alloy rather than by gauge number.