Skip to content
StockGauge Metal gauge · plate · bar · pipe

16 Gauge Stainless Steel Thickness and Weight

A 16 gauge stainless steel sheet is 0.0625 in (1.588 mm) thick. At 8,000 kg/m³ (0.2890 lb/in³) it weighs 2.601 lb/ft² (12.70 kg/m²), so a 4×8 ft sheet weighs 83.2 lb (37.8 kg) and a 1250×2500 mm sheet weighs 39.7 kg (87.5 lb).

Thickness
0.0625 in · 1.588 mm
Weight per ft²
2.601 lb
Weight per m²
12.70 kg
4×8 ft sheet
83.2 lb · 37.8 kg
1250×2500 mm sheet
39.7 kg · 87.5 lb
Density used
8,000 kg/m³ · 0.2890 lb/in³

Sheet metal gauge & plate weight calculator

Mode

Stainless Steel Gauge (U.S. Standard progression). Same nominal weights as MSG, divided by 40 lb/ft² per inch. Density 8,000 kg/m³ = 0.2890 lb/in³. Rounded handbook value for austenitic 304 and 316 (published figures cluster around 8,000 kg/m³).

Thickness

0.0625 in

1.59 mm

Per ft²

2.601 lb

12.70 kg/m²

4 × 8 ft sheet

83.24 lb

37.76 kg

1250 × 2500 mm

39.69 kg

87.50 lb

Gauge standard
Stainless Steel Gauge (U.S. Standard progression)
Thickness
0.0625 in · 1.588 mm
Nearest gauge
16 ga on the Stainless chart
Density
8,000 kg/m³ (0.2890 lb/in³)
Weight per ft²
2.601 lb
Weight per m²
12.70 kg
4 × 8 ft (48 × 96 in) sheet (32 ft²)
83.24 lb · 37.76 kg
1250 × 2500 mm sheet (3.125 m²)
87.50 lb · 39.69 kg

Worked calculation

  1. Look up the thickness. Stainless Steel Gauge (U.S. Standard progression), 16 ga = 0.0625 in. In millimetres: 0.0625 × 25.4 = 1.588 mm.
  2. State the density. Stainless Steel 304 / 316: 8,000 kg/m³ = 0.2890 lb/in³ (1 lb/in³ = 27,679.9 kg/m³).
  3. Weight per square foot. 0.0625 in × 144 in²/ft² × 0.2890 lb/in³ ≈ 2.601 lb/ft².
  4. Weight per square metre. 1.588 mm × 8.00 kg/m²/mm (density ÷ 1,000) ≈ 12.70 kg/m².
  5. Weight of a 4×8 ft sheet. 2.601 lb/ft² × 32 ft² ≈ 83.2 lb (37.8 kg). For a 1250×2500 mm sheet: 12.70 kg/m² × 3.125 m² ≈ 39.7 kg.
  6. Compare with the published chart weight. MSG defines 16 ga as 2.500 lb/ft² nominal (0.0625 in × 41.82 lb/ft² per inch). The density-based 2.601 lb/ft² is -3.9% lower because 7,850 kg/m³ equals 40.84 lb/ft² per inch, not 41.82.

Reference tables

16 gauge in each chart (density-based weights)
ChartThickness (in)Thickness (mm)lb/ft²kg/m²4×8 ft sheet (lb)
Manufacturers' Standard Gauge (MSG) 0.05981.522.44211.9278.1
Stainless Steel Gauge (U.S. Standard progression) 0.06251.592.60112.7083.2
Brown & Sharpe / American Wire Gauge (AWG) 0.05081.290.7143.4822.8
Galvanized Sheet Gauge 0.06351.612.59312.6683.0

The same gauge number gives a different thickness in every chart.

Stainless gauges around 16 ga
GaugeThickness (in)Thickness (mm)lb/ft²kg/m²4×8 ft sheet (lb)
14 ga 0.07811.983.25015.87104
15 ga 0.07031.792.92614.2893.6
16 ga 0.06251.592.60112.7083.2
17 ga 0.05631.432.34311.4475.0
18 ga 0.05001.272.08110.1666.6

Engineering and fabrication notes

16 gauge stainless is exactly 1/16 in (0.0625 in, 1.59 mm), the one gauge where the chart and a clean fraction coincide. That makes it easy to specify, and it is a typical thickness for commercial kitchen equipment, sinks, countertops, enclosures and panels. A few online charts print 0.0635 in for 16 gauge stainless; that is the galvanized steel figure. Stainless charts and mill literature give 0.0625 in. At 2.601 lb/ft² a 4×8 sheet weighs about 83.2 lb.

Frequently asked questions

What is the thickness of 16 gauge stainless steel?

16 Gauge Stainless Steel is 0.0625 in or 1.59 mm on the Stainless Steel Gauge (U.S. Standard progression) chart. Same nominal weights as MSG, divided by 40 lb/ft² per inch.

How much does a 4×8 sheet of 16 gauge stainless steel weigh?

A 4×8 ft (48 × 96 in) sheet of 16 gauge stainless steel weighs about 83.2 lb (37.8 kg) using 8,000 kg/m³. That is 2.601 lb/ft² × 32 ft². Actual mill weight varies with thickness tolerance.

Is 16 gauge stainless steel the same thickness as 16 gauge in other metals?

No. At 16 gauge the charts give 0.0598 in for carbon steel, 0.0625 in for stainless steel, 0.0508 in for aluminum and 0.0635 in for galvanized steel.

Why is 16 gauge stainless steel 0.0625 in thick?

Stainless sheet follows the older U.S. Standard Gauge progression, which divides the nominal weight by 40 lb/ft² per inch: 2.500 ÷ 40 = 0.0625 in. Carbon steel divides the same nominal weight by 41.82 and gets 0.0598 in. ASTM A480 discourages gauge numbers, so order stainless by decimal thickness.