16 Gauge Aluminum Thickness and Weight
A 16 gauge aluminum (Brown & Sharpe) sheet is 0.0508 in (1.290 mm) thick. At 2,700 kg/m³ (0.0975 lb/in³) it weighs 0.714 lb/ft² (3.48 kg/m²), so a 4×8 ft sheet weighs 22.8 lb (10.4 kg) and a 1250×2500 mm sheet weighs 10.9 kg (24.0 lb).
- Thickness
- 0.0508 in · 1.290 mm
- Weight per ft²
- 0.714 lb
- Weight per m²
- 3.48 kg
- 4×8 ft sheet
- 22.8 lb · 10.4 kg
- 1250×2500 mm sheet
- 10.9 kg · 24.0 lb
- Density used
- 2,700 kg/m³ · 0.0975 lb/in³
Sheet metal gauge & plate weight calculator
Thickness
0.0508 in
1.29 mm
Per ft²
0.714 lb
3.48 kg/m²
4 × 8 ft sheet
22.83 lb
10.36 kg
1250 × 2500 mm
10.89 kg
24.00 lb
- Gauge standard
- Brown & Sharpe / American Wire Gauge (AWG)
- Thickness
- 0.0508 in · 1.290 mm
- Nearest gauge
- 16 ga on the B&S / AWG chart
- Density
- 2,700 kg/m³ (0.0975 lb/in³)
- Weight per ft²
- 0.714 lb
- Weight per m²
- 3.48 kg
- 4 × 8 ft (48 × 96 in) sheet (32 ft²)
- 22.83 lb · 10.36 kg
- 1250 × 2500 mm sheet (3.125 m²)
- 24.00 lb · 10.89 kg
Worked calculation
- Look up the thickness. Brown & Sharpe / American Wire Gauge (AWG), 16 ga = 0.0508 in. In millimetres: 0.0508 × 25.4 = 1.290 mm.
- State the density. Aluminum 6061 / 5052: 2,700 kg/m³ = 0.0975 lb/in³ (1 lb/in³ = 27,679.9 kg/m³).
- Weight per square foot. 0.0508 in × 144 in²/ft² × 0.0975 lb/in³ ≈ 0.714 lb/ft².
- Weight per square metre. 1.290 mm × 2.70 kg/m²/mm (density ÷ 1,000) ≈ 3.48 kg/m².
- Weight of a 4×8 ft sheet. 0.714 lb/ft² × 32 ft² ≈ 22.8 lb (10.4 kg). For a 1250×2500 mm sheet: 3.48 kg/m² × 3.125 m² ≈ 10.9 kg.
- Compare with the published chart weight. MSG defines 16 ga as 2.500 lb/ft² nominal (0.0508 in × 41.82 lb/ft² per inch). The density-based 0.714 lb/ft² is 250.4% lower because 7,850 kg/m³ equals 40.84 lb/ft² per inch, not 41.82.
Reference tables
| Chart | Thickness (in) | Thickness (mm) | lb/ft² | kg/m² | 4×8 ft sheet (lb) |
|---|---|---|---|---|---|
| Manufacturers' Standard Gauge (MSG) | 0.0598 | 1.52 | 2.442 | 11.92 | 78.1 |
| Stainless Steel Gauge (U.S. Standard progression) | 0.0625 | 1.59 | 2.601 | 12.70 | 83.2 |
| Brown & Sharpe / American Wire Gauge (AWG) | 0.0508 | 1.29 | 0.714 | 3.48 | 22.8 |
| Galvanized Sheet Gauge | 0.0635 | 1.61 | 2.593 | 12.66 | 83.0 |
The same gauge number gives a different thickness in every chart.
| Gauge | Thickness (in) | Thickness (mm) | lb/ft² | kg/m² | 4×8 ft sheet (lb) |
|---|---|---|---|---|---|
| 14 ga | 0.0641 | 1.63 | 0.900 | 4.40 | 28.8 |
| 15 ga | 0.0571 | 1.45 | 0.802 | 3.92 | 25.7 |
| 16 ga | 0.0508 | 1.29 | 0.714 | 3.48 | 22.8 |
| 17 ga | 0.0453 | 1.15 | 0.636 | 3.11 | 20.4 |
| 18 ga | 0.0403 | 1.02 | 0.566 | 2.76 | 18.1 |
Engineering and fabrication notes
16 gauge aluminum is 0.0508 in (1.29 mm), within 2% of the stocked 0.050 in sheet. It is a common light gauge for covers, panels, enclosures and formed trim. At 0.714 lb/ft² a 4×8 sheet is about 22.8 lb and one person can usually handle it. The sheet is about 15% thinner than 16 gauge carbon steel (0.0598 in) and weighs 29.2% as much per square foot, so a like-for-like gauge swap saves weight but gives up stiffness.
Adjacent sizes and comparisons
- 14 gauge aluminum Next thicker gauge page
- 18 gauge aluminum Next thinner gauge page
- 16 gauge steel Same gauge number, different chart
- 16 gauge stainless steel Same gauge number, different chart
- 16 gauge galvanized steel Same gauge number, different chart
- 16 gauge steel vs 16 gauge aluminum Side-by-side comparison
- Sheet & plate weight calculator Any thickness, any size
- Why 16 gauge is not one thickness Reference guide
- All gauge pages Browse every gauge chart page
Frequently asked questions
What is the thickness of 16 gauge aluminum (Brown & Sharpe)?
16 Gauge Aluminum is 0.0508 in or 1.29 mm on the Brown & Sharpe / American Wire Gauge (AWG) chart. Geometric: d(n) = 0.005 × 92^((36 − n) / 39) in.
How much does a 4×8 sheet of 16 gauge aluminum (Brown & Sharpe) weigh?
A 4×8 ft (48 × 96 in) sheet of 16 gauge aluminum (Brown & Sharpe) weighs about 22.8 lb (10.4 kg) using 2,700 kg/m³. That is 0.714 lb/ft² × 32 ft². Actual mill weight varies with thickness tolerance.
Is 16 gauge aluminum the same thickness as 16 gauge in other metals?
No. At 16 gauge the charts give 0.0598 in for carbon steel, 0.0625 in for stainless steel, 0.0508 in for aluminum and 0.0635 in for galvanized steel.
What decimal thickness is closest to 16 gauge aluminum?
Aluminum gauge follows Brown & Sharpe / AWG: thickness = 0.005 × 92^((36 − 16) ÷ 39) = 0.0508 in. Of the round decimal thicknesses suppliers commonly stock (0.040, 0.050, 0.063, 0.080 and 0.100 in), 0.050 in is nearest, 1.6% thinner than the gauge value. Order by decimal thickness and alloy rather than by gauge number.